Spoon-feed radical change

Industrialist Charles Kettering said, "The world hates change, yet it is the only thing that has brought progress." Sometimes, to temper the anxiety and apprehension associated with change, it must be carefully and tactfully motivated.

04/01/1999


Industrialist Charles Kettering said, "The world hates change, yet it is the only thing that has brought progress."

Sometimes, to temper the anxiety and apprehension associated with change, it must be carefully and tactfully motivated. If an idea is hard to accept steps can be taken to smooth the way.

Engineering Project Manager Floyd Robertson could testify to this from personal experience when he decided to assign Bill Garvey the Labor and Materials Cost Assessment to determine the feasibility of adding a wing to Plant Warehouse C. The report, when complete, would be reviewed not only by Robertson, but also by Plant Engineer Harold Cross and ultimately by the president of the company as well.

Garvey's negative reaction was apparent from the moment the subject was broached. A bright young engineer, it would represent a career milestone for him and an opportunity for excellent exposure to his superiors. But Garvey didn't view it that way. He saw it as a worriesome first. He had helped prepare important reports in the past, but never had been assigned primary authorship and responsibility. If he failed it would be a big setback.

The young engineer confronted Robertson with a variety of excuses and reasons why he would be better served to assign someone else to the job. The manager understood his anxiety but felt it was a hurdle that had to be overcome as part of Garvey's education, development, and eventual advancement. The challenge lay in changing his mindset.

Question: What motivational strategy would you suggest that Robertson adopt?

Berger's advice: Robertson wisely discussed the problem with his boss, Plant Engineer Norman Berger.

"You identified the objective correctly," Berger replied, "as doing something to alter Garvey's mindset. Accepting primary responsibility for a project of this magnitude would be a formidable first for him. Instead of hitting him head on with the challenge, it might smooth the way if you spoon fed it to him."

"How?"

"By easing him into it a step at a time. Send him to Warehouse C to look into the situation. Then discuss it with him informally. Get his opinion on various aspects. Familiarize him with the project. Get him interested in it. After a week or so of exposure, my guess is he'll be a pushover to take over that project."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me