U.S. automakers close productivity gap

in 2007, Chrysler LLC and Toyota Motor Corp. were tied for the top spot in plant productivity in North America, according to a closely watched scorecard on auto manufacturing.


The Wall Street Journal reported today that last year "Chrysler LLC and Toyota Motor Corp. were tied for the top spot in plant productivity in North America," according to a closely watched scorecard on auto manufacturing. "On average both companies required the same number of labor hours - just over 30 - to assemble a vehicle and major components like the engine and transmission."
The Detroit Free Press added that Chrysler "got its first piece of really good news in more than a year as some of its most important manufacturing facilities won raves in the respected Harbour Report of productivity." With "buyers shift[ing] to more fuel-efficient vehicles, the plants that build Chrysler's smallest and most fuel efficient engines and vehicles have become the most efficient in North America by a wide margin," giving the automaker "an important competitive advantage." The report indicated that "Chrysler has tied Toyota as the most efficient vehicle maker in North America." In contrast, "Chrysler finished dead last in the survey just seven years ago."
According to a related Wall Street Journal article, the Harbour Report indicated that, "[h]elped by leaner processes and employee buyouts, Detroit's beleaguered automakers last year nearly erased the productivity deficit against their Japanese competitors." The difference between "the Big Six from the most- to least-productive in terms of total manufacturing labor dropped to 3.5 hours a vehicle, or about $260 a vehicle, down from 10.51 hours, or $790 a vehicle, in 2003." In addition to Chrysler's improvements, the report suggested that "General Motors Corp. (GM) brought its total manufacturing productivity performance to 32.29 hours a vehicle, its 12th consecutive year of improvement," while "Ford Motor Co. reduced its labor hours per vehicle by 3.5 percent to 33.88, despite producing 6 percent fewer vehicles than it did in 2006."
Bloomberg further explains that, while Toyota and Chrysler "plants used the least labor to build a vehicle in North America last year...worker buyouts helped improve efficiency at" GM and Ford. "Automakers are shifting to 'fewer, better, more competitive plants,' Ron Harbour, partner in Oliver Wyman's North American automotive practice, told reporters at an Automotive Press Association meeting in Detroit." Harbour added, "Plant flexibility is going to be crucial."
Meanwhile, the report says that while the U.S. automakers are more productive, they still are "losing money per vehicle," due to higher costs, the Associated Press notes.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me