Smart grid options examined for industries, commercial buildings, city residents at Siemens event

Smart grid technologies, controlling, monitoring and metering electricity use, applied with the appropriate public policies, can help make cities more attractive for residents, businesses, and industries. Smarter electricity use can increase convenience, lower costs, improve the environment, and augment competitiveness, said experts from the Siemens Smart Grid Tour event.


Inside the Siemens Smart Grid Tour dome, attendees learn how smart grid technologies and policies can lower electricity costs for industrials, commercial, and residential facilities. Photo by , Mark T. HoskeSmart grid architecture, applied with the appropriate public policies, can help make cities more attractive for residents, businesses, and industries, by increasing convenience, lowering costs, improving the environment, and augmenting competitiveness. These were among suggestions from technology, policy, and architectural and engineering experts gathered by Siemens for "Siemens Answers: The Smart Grid Tour, in Oak Brook Terrace, IL (near Chicago), the fourth stop in a 10-city U.S. tour.

The tour, with a day of conference sessions, and a tented multi-media dome of related Siemens technologies and applications, provided attendees with insights into smart grid advances.

Daryl Dulaney, president and CEO of Siemens Industry; Source: SiemensDaryl Dulaney, president and CEO of Siemens Industry Inc., suggested that Siemens Smart Grid technologies, able to control electricity from source to use, also need smart public policies and regulations for optimal implementation in various applications.

Industry, utilities, public policy people, and technologies providers learn from each other at events like this, noted Wes Sylvester, director, Smart Grid for Siemens Energy. Sylvester, in comments to (CFE Media) advised that industrial and commercial electric utility customers measure electricity use, so they know when they're using what amount. Significant savings can be available through electricity metering and data management.

Siemens Smart Grid Tour arrived in Oak Brook Terrace, IL, June 23, near Chicago, fourth stop on a 10-city U.S. tour. Photo by Control Engineering, Mark T. HoskePeak demand and other electricity rate incentives can lower costs, as well as renewable energy sources, such as solar, wind, and ground-source cooling; smarter building automation systems can coordinate all of that, Sylvester said. Continuation of smart grid standards also will help, he predicted, such as the U.S. National Institute of Standards and Technology-driven IEC 61850 standard for substation communications, along with other standards efforts.

A three member panel discussed policies and technologies related to smart grid development. Panelists were:

  • Tristan d'Estree Sterk, The Office for Robotic Architectural Media and the Bureau for Responsive Architecture;
  • Story Bellows, director, The Mayor" Institute on City Design; and
  • Kathy Tholin, CEO Center for Neighborhood Technology and Project Director, Illinois Smart Grid Initiative.

Left to right, Tristan d'Estree Sterk, Story Bellows, and Kathy Tholin speak in a Siemens Smart Grid Tour, panel discussion, sponsored The Economist. Photo by Control Engineering, Mark T. HoskeBellows said that mayors talk most about competitiveness and generally aren't well-versed in sustainability or energy-related issues. There are opportunties to create new partnerships among utilities, technology providers and city goverments.

"We're just learning how to have these conversations. There aren't enough people who are experts rolling out smart grid technologies on an urban scale," Bellows said, adding that technologies applied shouldn't be closed and proprietary.

Tholin noted that her organization, working on a six-year pilot of real-time electricity pricing, helps consumers--residential, commercial, and industrial--make better decisions. Having the right kind of energy usage information and related benefits ensure more appropriate energy use, Tholin advised.

"Experience says the critical piece is to have customers understand and have a financial stake in ways to change their behavior," Tholin said. "It's not that complicated, and people are able to respond. We underestimate peoples' abilities to use smart grid technologies," she said, noting that an "advanced display showing energy use would help." Security can be built in to protect information.

There is a need to invest in technology so consumers can spend money more wisely, agreed d'Estree Sterk. Considerations include the full lifecycle of a structure and its contents, including construction methods and materials.

"Designing for peak loads is an old way of thinking. Changing the ways buildings operate can improve how people live. Next-generation buildings could move in the wind [with more stability and strength than today's buildings] and respond to the physical loads, contain intelligence, use light weight materials, and save more energy," d'Estree Sterk said.

Many smaller companies are pushing the boundaries of what we deem acceptable, Bellows said, and are today's testing grounds for sharing best practices on a larger scale tomorrow.

Tholin noted that smart energy choices using technology can extend to transportation, as well. For instance, a bus tracker application for smart phones can make public transportation much more convenient and save time and energy by reducing the need or desire for individuals to own automobiles in metro areas. A smart information system also can help with urban car sharing.

Bellows said another incentive could be mortgages that account for lower costs of nearby transportation to help shift behaviors in more energy efficient ways.

Eventually, though, d'Estree Sterk said the Internet of things, an ecosystem of smart devices, will communicate and automate some decisions about energy use, in line with consumers' wishes, allowing manual changes when desired.

But from a social justice standpoint, Tholin said, low-income consumers also should be given options to take advantage of lower energy rates with smarter energy use decisions.

That's not only in new construction. d'Estree Sterk said retrofits can help, for instance, by installing open window and door sensors that alarm or disable air conditioning or heating systems.

Resource allocation remains a challenge. While it's tough to invest in energy efficiency mechanisms that may not seem completely proven, it's better public policy, Bellows said, than laying off 20 more firefighers to balance a city budget. If something's not broken, it's easier to do what we've always done, Bellows said; a crisis may help speed adoption.

Tholin predicts wider integration of buildings, transportation, and energy-related goals, creating more biking, walking, public transport, and electric vehicles tied to off-peak charging.

d'Estree Sterk expects additional use of solar, wind and water to augment the grid in a more distributed fashion. Color shifting surfaces will change the thermal profile of buildings as needed.

"More information needs to be shared about energy use," Tholin said. "Commonwealth Edison is doing a smart grid pilot program with 140,000 households, but if you're not in the program, you probably don't know about it." Also, Illinois Institute of Technology (IIT) will be bringing a smart grid training center online shortly.

Energy savings needs to begin with design, d'Estree Sterk said. Structures should be designed to educate people about energy use in real time. Water goes down the drain, waste in the garbage, and energy up in smoke, and we aren't aware of the impacts, he suggested. Intelligent designs with integrated technologies can encourage better decisions.

The panel, titled "Thought Leadership Discussion: Intelligent Infrastructure: The New Urban Habitat," was moderated by a writer for The Economist magazine.

Topics covered in the Siemens Smart Grid Tour conference sessions include:

  • Enabling Generation & Renewables;
  • Phasor Measurement Units and the Grid;
  • Smart Grid Integration;
  • Meter Data Management Systems;
  • Automation in the Grid;
  • Energy-Centric Process Transformation: Bridging Operational Technology to Information Technology to create business value;
  • Buildings of the Future;
  • Preparing a Building for Smart Grid; and
  • Smart Grid – The Vital Role of Industry.

Learn more here:

Also read:

Siemens Automation Summit: Cost-effective ways to reduce risk, limit cost, improve effectiveness

Smart grid can help encourage smarter policies, suggests Cisneros at Siemens event

See other smart grid and energy efficient articles on the Control Engineering Sustainable Engineering Channel.

- Mark T. Hoske, content strategist,, part of CFE Media,

The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Pipe fabrication and IIoT; 2017 Product of the Year finalists
The future of electrical safety; Four keys to RPM success; Picking the right weld fume option
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Power system design for high-performance buildings; mitigating arc flash hazards
VFDs improving motion control applications; Powering automation and IIoT wirelessly; Connecting the dots
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me