Infrared and thermal imaging system benefits and applications

Infrared and thermal imaging solutions have become widely available, they've become widely utilized and have become cheaper overall. They bring a number of advantages over visible imaging solutions for certain applications.

02/25/2018


Image courtesy: Bob Vavra, CFE MediaInfrared and thermal imaging solutions are gaining popularity in a number of applications across the globe. Early thermal imaging solutions were expensive and had to have some form of external cooling system. Today, a thermal imaging system no longer needs the bulky cooling system and is far cheaper, making them more accessible and useful in a variety of settings.

As infrared and thermal imaging solutions have become widely available, they've become widely utilized. They bring a number of advantages over visible imaging solutions for certain applications.

Thermal and infrared imaging systems are used in a wide range of industries and applications. For example, they're used in security settings to identify intruders, surveillance applications to monitor critical infrastructure, construction to detect flaws in a building, and agriculture to track crop health, among many other applications.

These types of cameras are often used outdoors to detect light outside of the visible spectrum. The ability to see different spectrums of light has many benefits, regardless of the application.

Infrared and thermal imaging system benefits

While thermal and infrared systems are deployed in a wide range of settings, there are fundamental advantages that non-visible imaging solutions have over visible imaging solutions.

Infrared and thermal imaging systems perform well in low-light and low-visibility situations. This is critical for outdoor applications where light and visibility are a constant variable, and especially useful in security applications—no camouflage will fool a thermal camera.

Infrared and thermal cameras can also be used to measure temperature differences, which is critical for monitoring critical equipment. For example, a thermal camera can monitor electrical equipment—which heats up before it fails—to signal when maintenance or replacement is required.

Thermal and infrared image systems provide great return on investment (ROI) in most applications. In the examples above, keeping a location safe and secure, or avoiding a catastrophic equipment failure, can lead to rapid ROI. Thermal and infrared cameras, with their better performance in low-light situations, often require less initial investment too, as fewer cameras can be used. All of this adds up to reliable ROI.

Infrared and thermal imaging systems have become a common solution for security, surveillance and monitoring applications, among others. Advancing technology, decreasing costs and fundamental advantages over visible imaging solutions in certain applications have all led to the growing use of infrared and thermal imaging systems.

This article originally appeared on the AIA website. The AIA is a part of the Association for Advancing Automation (A3). A3 is a CFE Media content partner. Edited by Chris Vavra, production editor, Control Engineeringcvavra@cfemedia.com.

ONLINE extra

See more from AIA below. 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me