Four best practices in robotic grinding and finishing

Robotic grinding and finishing success can be tricky, but following best practices such as controlling the force of grinding and finishing systems and knowing what robot to use can help companies avoid some potential pitfalls.

07/11/2018


Image courtesy: Bob Vavra, CFE MediaThe path to success in robotic grinding and finishing may not always seem straightforward. Achieving return on investment (ROI) for all robotic systems and maximizing productivity are among the top priorities of just about any manufacturing setting, but there are common pitfalls when it comes to robotic grinding and finishing.

Following proven best practices can help ensure the implementation and ongoing automation of grinding and finishing processes delivers the intended results.

Four tips for robotic grinding and finishing success

While there are many things that can be done to improve robotic grinding and finishing processes, there are four main ways that may have the greatest impact.

1. Control the force of grinding and finishing systems

Controlling the force of robotic grinding and finishing systems not only makes for a safer work environment, but it can also help improve product quality by ensuring the proper force is exerted at all times. Typically, force is controlled by fixed passive controls, variable passive controls, or feedback for active force control.

2. Use the right robot

All too often, the wrong size robot is used for robotic grinding and finishing applications. Assess the reach the robot will need and determine the right size. Likely a six-axis robot will be needed, but there are industrial and collaborative options available, depending on the specific application.

3. Use the right grinding equipment

There are a lot of considerations that go into choosing the right robotic equipment and this can sometimes lead to oversights on the basic grinding and finishing equipment. Be sure to have enough horsepower and find the correct balance between rigidity and flexibility in the contact wheel. Like many things, finding the right abrasive is an iterative process, so it's important to take the time and ensure the right grinding and finishing equipment is used.

4. Don't automate all at once

Automating all of a company's processes at one time only increases the risks that one small mistake could have big consequences on productivity and ROI. Try automating a portion of the grinding or finishing process first, and building on small success to eventually achieve fully automated production.

Controlling the force of grinding and finishing systems, using the right robot, using the right grinding equipment, and automating one process at a time are some of the best practices for robotic grinding and finishing.

Finding success in robotic grinding and finishing may seem difficult, but there are tried and true methods for achieving the desired results.

This article originally appeared on the Robotics Online BlogRobotic Industries Association (RIA) is a part of the Association for Advancing Automation (A3), a CFE Media content partner. Edited by Maura Walsh, content specialist, CFE Media.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me