Machine tool optimization: Future machines will talk to other machines, systems

Manufacturers are “standing on the next of the next major step” in efficiency with improvements in machine tool optimization, said Siemens officials on Monday, July 29, in advance of the EMO machine tool show in Hannover, Germany, in September. More integrated, self-optimizing future machines will be 50% more efficient.

07/30/2013


Siemens is extending its preparations for the next step in manufacturing to offer the machine tool building industry an emerging series of integrated solutions. An integrated workpiece measurement system, with a measurement accuracy of 30 nanometers deploImprovements in machine tool optimization have manufacturers “standing on the next of the next major step” in manufacturing efficiency, despite a flattening global machine tool market, said Siemens officials on Monday, July 29.

In advance of the EMO machine tool show in Hannover, Germany, Siemens officials briefed the U.S. trade press on the state of the industry and the products and strategies Siemens would bring to the market.

Drivers in the machine tool market are to boost efficiency, including energy efficiency, to reduce the time to market and to increase machine flexibility, explained Bernd Heuchemer, global VP of marketing and communications for Siemens AG, drive technologies division, motion control systems business.

“Product design and production design are coming closer together,” said Heuchemer, who noted that the marrying of design and production can create increased productivity in machine set-up and operation.

Talkative machines, 50% efficiency gain

Heuchemer sees a day when “all machines on shop floor are connected to each other, and machines also talking to MES or ERP system to see how machines are working. As a result, we can increase efficiency of machines up to 50%,” he said. “We will have more optimization, and our vision is the future 10-15 years, we are talking about self-optimization of machines. We are on our way to the future.”

For the present, the market continues to meet demand, but there’s no large push to race past it. Rajas Sukthankar, general manager for the machine tool systems business at Siemens Industry Inc., told the media that the slowing markets in China and slow economic recovery elsewhere will lead to a flat machine tool market into 2014. That includes in the U.S., despite solid growth in automotive and expansion of oil and gas markets.

“Machine tool demand is matching up to productivity needs,” Sukthankar said. “Year-over-year manufacturing activity is not expanding, and that’s limiting the growth of machine tool order in the next six months.”

Hardware, commissioning, scalability

Chris Pollack, the dealer support manager for Siemens Industry Inc., said the CNC line in display at EMO would address the needs in the market for intelligent machine operations.

“It bridges the gap between the control operation and the applications they are used in,” Pollack said. He said the Sinumerik Integrate for Production product suite solution on display at EMO would address the issues of costs for hardware, commissioning, and scalability that he said have limited IT investments in machine tools in some cases.

2013 EMO event is Sept. 16-21 in Hannover, Germany. Siemens will be at EMO Hannover / Hall 25, booth D33.

- Bob Vavra is content manager, CFE Media, Plant Engineering, and Control Engineeringbvavra(at)cfemedia.com

 

ONLINE extra: Sinumerik line advances add integration, optimization

According to information provided with the EMO preview mentioned above, the Siemens Industry Sector Drive Technologies Division, said:

  • More integrated solutions are needed in machine tool building
  • CNC machining productivity and flexibility can be enhanced through a more highly-developed Sinumerik CNC portfolio
  • Sinumerik and Integrated Drive Systems (IDS) provide optimum added value through consistent integration across the entire lifecycle.

Broad-based CNC competence: Siemens will be demonstrating how productivity, flexibility, and safety can be increased in CNC production with an array of smart additions to its Sinumerik portfolio. Courtesy: SiemensThe innovations presented by Siemens at the EMO 2013 will focus on smart function improvements, which will make for greater CNC operating convenience, increase precision at the workpiece, and allow greater machining safety across every category of machine, from the compact to the high-end solution. A new function to protect against unwanted component collisions will be showcased by Siemens, for example, alongside improvements to its cohesive Sinumerik Operate user interface, including upgraded simulation options.

The Sinumerik CNC portfolio is additionally playing an increasingly important role in preparing the ground for the next step in the evolution of CNC production, also within the framework of the Siemens Integrated Drive System (IDS). With a view to optimizing the addition of value across the process chain through consistent integration, IDS is used to integrate all drive train components into the production process environment. This also applies to Sinumerik CNC system solutions.

Drives, motors

For every Sinumerik application, ideally coordinated system components, such as high-powered Sinamics drives and Simotics motors, have been used. With horizontal integration of the drive train, with Sinumerik Integrate for Production, Siemens also is allowing vertical integration within the control architecture of industrial manufacturing automation. A passenger car manufacturer illustrated, this type of vertical and horizontal integration within the production process,  increased vehicle launch by up to 50%.

Integration across the entire product life cycle can in turn be implemented with PLM software from Siemens. This concept is already being implemented by leading metals processing industries, such as the automotive, aerospace, and medical technology sectors. This entails the increasing execution of product development and production planning onscreen, before one machine tool has been installed. If a modular machine is developed on a virtual basis right from the outset so that it can be fully simulated, time savings up to 40% can be achieved. In running operation, productivity increases of 10% or more are also made possible by continued simulation and optimization.

Integrating PLM

At this year’s EMO, Siemens will be showcasing the further development of its PLM software, which encompasses scalable solutions for component production and further improved IT integration from the workpiece model through to the machine tool. Siemens will also be revealing the next stage in productivity for numerical control (NC) programming with the further development of its already popular PLM software, NX CAM. This software will include special industry-specific machining functions and access to a new Manufacturing Resource Library.

- Edited by Mark T. Hoske, CFE Media, Control Engineering, and Plant Engineering, mhoske(at)cfemedia.com.

www.usa.siemens.com/cnc  

www.usa.siemens.com/drivetechnologies  

Related coverage

See additional machine tool coverage linked below.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.