The cloud's role in data management

The connectivity of devices that use the Industrial Internet of Things (IIoT) must collect and analyze lots and lots of data.

06/15/2017


The connectivity of devices that use the Industrial Internet of Things (IIoT) must collect and analyze lots and lots of data. Courtesy: GE Automation & ControlsBillions of sensors all around the world are making consumer devices smarter, safer and more efficient. Wearable products have revolutionized our understanding of wellness by providing more information about our daily health. Appliances and systems in our homes now are connected and make intelligent decisions to enhance our lives. Entire cities now are employing big data and sensors to prevent crime, manage crowds, reduce energy use, and much more.

The connectivity of and communication between these devices, as we know, is referred to as the Industrial Internet of Things (IIoT). But before these devices can start communicating with end users and each other, they must collect and analyze data—lots and lots of data.

Data for many of these devices is collected, stored, and analyzed in cloud-based environments such as the Amazons and Googles of the world. Even our Fitbit trackers have a cloud where our health analytics are stored. While there's a lot of data gathered from consumer products, there's a much larger amount of data found in industrial machines and an even greater need for the same type of connectivity and analytics. IIoT will increase efficiencies, reduce costs, and improve employee health and safety while generating new revenue streams for businesses.

Controls have been managing machines all around us for centuries. Just as our machines have evolved, so, too, have the analytics our machines provide. However, the data those machines collect and analyze, up to this point, has been limited to the memory of internal computers running at or inside the machine; the intelligence of those machines essentially has been limited to that memory.

New industrial control systems now are providing the same type of connectivity, communication, and analytics for our industrial assets as consumers have seen for several years. These connected controllers and systems not only run our machines like they used to run, but they also now have the capability to create an outer loop and custom applications that gather data in real time and advise the controller to make more intelligent decisions. Just as connected sensors and wireless devices transport data to consumer clouds, the vehicles to transport big data to the industrial cloud are edge devices and sensors in or near machines.

Many machines and plant systems don't offer the type of connectivity and deep analytics today's industry demands. These machines require third-party solutions to gather data and provide critical analytics. The more data gathered, and the closer to the machine you run data, the more accurate and intelligent the decisions the machine makes.

Some machines can't be reached with traditional Ethernet cables because of the distance between the internet source and the machine. Not only would it be cost prohibitive to drop and run that wired connection, but the proximity would make data gathered less favorable. Connecting to these machines wirelessly makes sense.

Cloud-based, wireless solutions provide greater flexibility than wired solutions. The cloud empowers the elasticity of data storage and performance and is not subject to the constraints typical of a local computer. Connecting to the cloud also enables a fleet of machines to be managed and to communicate with each other, providing thorough analytics for the entire fleet. For example, there's an app that leverages the power of the industrial internet, connects to a fleet of wind turbines and enables them to coordinate the speed and direction of their blades to maximize the wind farm's overall energy output.

However, the cloud is not always a viable option due to latency, costs, regulations, and other factors. Think also about the criticality of the data being analyzed. If a self-driving car was required to go to the cloud to make important decisions, the car's response time would be too slow. Industrial assets are the same way. Some things can be done in the cloud, but other problems need to be analyzed as close to the machine as possible. Digital industrial companies are developing products that are designed to work on the industrial edge and make collecting, storing, and analyzing data easier and more accurate.

Three years ago, we couldn't have imagined IIoT as it is today. Similarly, we can't speculate on where it will be three years from now. The rate at which things are changing makes it difficult to recommend specific assets or systems that should be hard-wired or should be wireless or which apps should run in the cloud versus at the industrial edge, so it's important to think the process through strategically and go the route that makes the most sense for your plant.

Rebecca Boll is general manager, sales for GE Automation and Controls.  



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me