Instruments & Controls


Voluntary recall

IDEAL Industries, Inc., Sycamore, IL, is conducting a voluntary recall of certain manufacturing lots of its voltage and voltage/continuity testers sold primarily in North America. The recalled units are tester models 61-065, 61-066, 61-067, 61-076, 61-079, and 61-080 manufactured in Sycamore, IL, and Ajax, Ontario, Canada, from November 1999 through May 2002. No other IDEAL tester, meter, or product is affected by the recall.

There are reports of the solenoid shorting at higher voltages without warning and blowing the faceplate off the unit. There have been two reports of users burned when using these units. Distributors, representatives, and customers have been notified of the recall.

For details on identifying a suspected tester, and/or to arrange for its return and replacement, call 877-557-8598, send an email to , or visit the web site at .

DCS market growth

An ARC Advisory Group study predicts the worldwide market for distributed control systems (DCSs) will grow from $9.1 billion in 2002 to more than $10.3 billion in 2007. However, ARC has scaled down its growth projections since its previous DCS study because of a more than 2% decline between 2001 and 2002.

Key vertical industry segment indicators remain unchanged. Process-intense industries, such as refining, petrochemical, power, steel, and pulp and paper continue to struggle.

IR camera

Model E4 lightweight and portable infrared (IR) inspection camera introduces a radiometric jpeg image format that allows image post processing on the camera or on a PC. It also provides three independent, movable-spot temperature cursors, and audible alarming for high, low, and delta-T thresholds. As the thermographer scans, the camera beeps when the threshold temperature has been reached within its field of view. The camera can measure 3 spot temperatures anywhere on the thermal image. Features include ambient temperature compensation, premium quality optics, laser target designator, rechargeable batteries, 60-Hz. real-time scan rate, a -4 F to 1652 F measurement range, and USB and serial port connections.

FLIR Systems . Write 309 on PE card

Silicone rubber heaters

SRMU silicone rubber heating blankets are used for freeze protection, process temperature control, melting of solids, temperature heat-up, or maintenance. Heaters withstand chemicals, moisture, and abusive treatment, and feature rapid heat-up, steady temperature maintenance, and uniform heat distribution. The flexible, radiation resistant heaters come in a wide variety of sizes and shapes, have an optional adhesive backing, and withstand continuous exposure to temperature up to 450 F.

OMEGA Engineering, Inc. Write 310 on PE card

Wireless I/O

MCR-RT-I/O-PLUS integrated radio and expandable I/O module eliminates cable and conduit for analog and digital signals in harsh environments. Unit uses digital spread spectrum (DSS) frequency-hopping techniques to guarantee a license-free link without interference between remote devices and control room. Typical range within the plant is 600_1000 ft.

Phoenix Contact, Inc. Write 311 on PE card

Machine monitoring modules

XM Series, designed as a distributed network of modules deployed on an open standard industrial bus, has been expanded. The modules added to the series include Ethernet/IP gateway; low-frequency vibration module; gSE vibration module, which alternates between standard vibration and spike energy measurements to identify developing faults in rolling element bearings; and process and temperature modules that include intelligent monitors, making each module a complete monitoring system in a compact package.

Rockwell Automation Write 312 on PE card

Burner control simulator

Quanta-Flame Simulator is a multifunctional tool for setting up and verifying proper operation of burner control systems. Features include flame rectification output for all flame-rod-type controls, UV scanner signal output, 4_20-mA signal source for testing actuators and other current-input devices, 4_20 signal receiver for testing instrument output, LED indicators, flame signal output adjustment, and easily accessible wiring terminals.

GN Electronics, Inc. Write 313 on PE card

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me