Some costs of savings

Recently, it seems that hardly a day goes by without reading or hearing about job cuts. If it's not a reduction that makes the news, then it's a friend, or acquaintance, or fellow employee who has been let go in the name of saving money. And in the majority of cases, the cuts are probably "necessary.


Recently, it seems that hardly a day goes by without reading or hearing about job cuts. If it's not a reduction that makes the news, then it's a friend, or acquaintance, or fellow employee who has been let go in the name of saving money. And in the majority of cases, the cuts are probably "necessary." Yet one has to wonder whether management might not be trading short-term results for long-term problems.

While the old admonition that "no employer can afford to lose good employees" sounds wise, reality suggests that companies can afford to get rid of good employees. They do it all the time. Unfortunately, there's really no way to put a price on knowledge, or creativity, or experience. And those are the kinds of values people are talking about when they say they "can't afford" to lose good employees.

To be sure, no business can operate for too long if it continues to employ people it doesn't need. Yet history shows that many cutbacks are short-lived, while their adverse effects may continue for years — long after the lost workers have been replaced.

Of course, decisions to lay off workers are never easy, and they're not made in a vacuum. Yet, I fear the decisions are too often made with a bias to short-term goals and an eye for how much the layoffs will save as opposed to how much they'll cost.

We've all been exposed, I'm sure, to the scenario of good workers being let go only to be rehired or replaced a few months later. The reasons vary from changes in business conditions to realizations that the work those people were doing was pretty important after all. Regardless of the reason, such scenarios can end up being much more expensive in the long run than the quarterly balance sheets reveal.

Consider, for example, the cost of hiring these days. The Saratoga Institute Human Capital Report for 2000 shows that for 991 surveyed companies, the total cost per hire averaged $4588. For exempt employees, the total cost per hire averaged $12,032; for nonexempt, $989. Now, add in the costs for training new hires, which can easily run into the thousands of dollars per employee, and the costs of lost productivity due to inexperience, lack of knowledge, etc., plus the costs of severance packages, and the totals mount up rapidly.

Before another round of cuts comes, you might want to delve into how much they cost, as well as how much they save.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me