Safety: Is it the Sixth ‘S’ in a 5S system?

Make safety an integral part of your productivity improvement plan

05/08/2014


As plants work toward meeting financial goals and maintaining compliance with safety regulations, it's often thought that productivity is compromised. Safety doesn't have to compromise productivity. On the contrary, safety and productivity complement each other.

According to research, manufacturers that emphasize safety often excel in productivity and efficiency. While compliance with safety regulations is critical, high-performing plants integrate worker safety with productivity programs and receive strong backing from management at all levels.

Performance and compliance

An organization can comply with safety regulations and yet not perform as well as another organization that also complies with regulations. The difference lies in management support and a culture that integrates safety into all aspects of its continuous improvement programs such as Lean. In high-performing organizations, safety becomes part of the same continuous improvement programs that drive productivity, efficiency, and business results.

An Aberdeen Study identified four key performance indicators (KPIs) to distinguish Best-in-Class from Industry Average and Laggard organizations relative to plant safety. The KPIs included overall equipment efficiency (defined as Availability X Performance X Quality), repeat accident rate, injury frequency rate, and unscheduled asset downtime. 

Manufacturers in the Best-in-Class category, or top 20%, had the highest OEE (90%) and the lowest accident and injury rates (0.2% and 0.05%, respectively). In contrast, the Laggard category, or those in the bottom 30%, had the lowest OEE (76%) and the highest accident and injury rates (10% and 3.0%, respectively).

Safety is inherent to Lean principles

Two key pillars of Lean are standardization and employee empowerment. Though often considered paradoxical, the pillars represent basic tenets of a safety culture. Plant safety is ensured, in part, by establishing standard operating procedures (SOPs) and work instructions (WIs). However, as operations change, employees at the source are often more aware of potentially unsafe conditions. Empowerment gives these employees an opportunity to challenge a standard and provide a corrective action before an incident occurs.

"Give employees an opportunity to test their ideas by trying it for a brief period; and if the idea is successful, then change the work instruction or standard,” said George Biggs, quality and safety manager at ErectaStep, which manufactures industrial steps, safety gates, and crossover systems for a variety of industrial applications inside manufacturing plants and petroleum refineries.

"Although we invest in safety training and equipment, we also encourage employees to use common sense. If you see a safety issue that can be fixed quickly, just fix it," said Biggs. He explained that his teams have also conducted Kaizen events for safety issues that may require root cause analysis before jumping to a quick fix.

Consider safety within the context of the 5S methodology. The connection between efficiency and safety becomes more apparent. While some argue that safety should be the sixth "S," others believe that safety is inherent to the original 5S methodology. 

5S methodology

The basic 5S methodology is:

  • Sort: Remove unnecessary tools from the work area; keep needed tools in an easily accessible place.
  • Straighten/Sift: Arrange tools in an orderly workflow; "There's a place for everything and everything in its place."
  • Sweep: Keep the work area clean; ensure the area is in order.
  • Standardize: Promote interchangeability by using uniform procedures.
  • Sustain: Ensure adherence to procedures.

Connections have also been made between reliability excellence and improved safety. In fact, the Aberdeen Study mentioned previously indicated that Best-in-Class companies had a 5% higher OEE compared to peers in the Industry Average category.

When routine maintenance is not conducted, the alternative is emergency repair. Such unplanned downtime often leads to poor housekeeping—repair debris and clutter left at the work area following an urgent repair—which can often result in accidents in addition to reduced operational efficiency and OEE. Most reliability-based maintenance programs apply Lean principles to improve not only OEE, but also worker safety. 

Applying 5S methodology

The following example illustrates how fall protection, the leading cause of workplace injuries, can leverage 5S methodology to reduce incidents while improving efficiency and effectiveness.

Workers require access to an elevated work area to conduct routine maintenance. For some, the first response is a ladder. While a ladder may make sense for its practicality, it comes with its own set of safety issues and may not be efficient if workers must first locate a ladder and bring it to the work area. Keeping a ladder in the area may seem like a good solution to the efficiency issue. However, considering the "Straighten" tenet, efficiency gains may be offset by the safety risk of added workspace clutter.

Biggs conducts ABC analysis to sift items. For example, "A" items are those used every day. They should be readily accessible. "B" items, used weekly, for example, should be somewhat accessible, but out of the way. "C" items that are used infrequently can be tucked away.  Taking a holistic look at the previous example from a 5S perspective, what's needed is safe access that's efficient, compliant, and unobtrusive—a solution that keeps the work area uncluttered (Straighten / Sift), meets safety regulations (Standardize) and does so consistently over time (Sustain). Can a plant meet these criteria and maintain efficiency? Modular workspaces may be the answer.

One safety module at a time

For many plants modularity strongly influences the choice in systems implemented throughout the plant. Modular systems offer a lower total cost of ownership and greater flexibility to accommodate the accelerated pace of change in business that ultimately impacts the manufacturing footprint. Changes in automation systems, packaging systems, or relocation of production from one plant to another require footprint changes that often result in less-than-efficient access.

More plants are considering modular access solutions that not only emphasize safety, but also provide flexibility to reconfigure pre-engineered and compliant modules in other difficult-to-reach areas of the plant. Modularity supports 5S tenets of Sort, Standardize, and Sustain. In our previous example of access to an elevated work area, modular stairs, rails, and a work platform are erected to enable safe efficient access. It's safer than a ladder, particularly when workers must also bring tools to conduct maintenance activities. And the secure platform provides needed space for tools, preventing workspace clutter.


<< First < Previous Page 1 Page 2 Next > Last >>

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me