Innovation is the key to economic strength

The real key to America's economic strength has always been creativity and innovation. Since this country's founding, Americans have been eager to embrace new concepts and capitalize on them. We've developed ingenious new systems for production and distribution and unlocked mysteries in diverse areas such as health care, technology, engineering and industry.


The real key to America's economic strength has always been creativity and innovation. Since this country's founding, Americans have been eager to embrace new concepts and capitalize on them. We've developed ingenious new systems for production and distribution and unlocked mysteries in diverse areas such as health care, technology, engineering and industry. Americans have always been willing to go beyond the beaten path, experiment with radical new ideas and invest in the future.

All the while, manufacturing has been an important seedbed of America's creativity. Manufacturing generates nearly two-thirds of industrial research and development, which is a major reason why manufacturing accounts for three-fourths of the nation's exports and supports more than 20 million high-paying jobs. Innovation has generated the productivity that has accounted for half of the GDP growth over the past 50 years, and manufacturing continues to set the pace. Today, despite unprecedented global competition, total manufacturing output and productivity are at record levels, capital investment is rising and product quality has never been higher. By itself, U.S. manufacturing would be the eighth largest economy in the world.

But while there is no question that our nation's strength lies in our leadership in innovation and productivity, it is equally true that our leadership is being challenged as never before. A recent National Association of Manufacturers (NAM) report by The Manufacturing Institute found that downward trends in U.S. manufacturing innovation pose a serious threat to America's long-term economic growth and living standards.

America's continuing leadership in innovation and the production of high-value manufactured goods is essential to our nation's long-term economic growth, productivity gains and standard of living. But America's economic leadership will be at risk if current trends continue. We are being challenged by global competition, a looming skills gap that poses a future worker shortage, and by increased structural production costs. And while the United States continues to spend more than any other country on R&D investment, U.S. growth in R&D has averaged only about 1 percent per year in real terms since 2000. This is a "wake-up" call - a call to invest in America, in our current and future workers and in our ingenuity.

In his State of the Union Address last month, President Bush recognized this core challenge to our nation's economic leadership, and responded forcefully with his American Competitive Initiative. The President's commitment to increase funding for R&D in the public sector and improve science and math instruction in our schools is exactly what we need, as is his proposal to make the R&D tax credit permanent. It is simply absurd that we have to fight to have that most basic provision renewed every year.

The NAM is working with the Bush Administration and Congress to advance pro-growth policies to promote innovation, investment and productivity and ensure a healthy manufacturing economy in the future. We are working with government at all levels to foster a new generation of manufacturing workers who can handle advanced manufacturing technologies. America's glory days are not behind us, but rather are a continuing reflection of our capacity to adapt to a changing world.

But we must be proactive and meet these challenges head on. As manufacturers, the backbone of the U.S. economy, our innovation and ingenuity are being put to the test as we bridge the gap to the 21st century.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me