Helping small manufacturers understand the rules of safety

Recently, OSHA has been offering a series of seminars to national office employees called “The Business of Small Business.” These seminars offer a chance to learn what OSHA is doing to help small businesses, and provides opportunities for small businesses to present case studies of how they implemented safety and health programs, along with the results.


Recently, OSHA has been offering a series of seminars to national office employees called “The Business of Small Business.” These seminars offer a chance to learn what OSHA is doing to help small businesses, and provides opportunities for small businesses to present case studies of how they implemented safety and health programs, along with the results. I had the opportunity to attend one of these forums and thought it would be useful to highlight some of the ways OSHA assists small businesses.

The agency understands that while any business may require assistance, small businesses in particular may find it difficult to develop safety and health programs on their own. Employers having little experience with OSHA, in particular, or occupational safety and health in general, may have difficulty reading and applying OSHA standards, or even knowing which regulations apply.

A common question from callers to OSHA’s national office is, “What standards do I need to know?” There are always unique situations to specific businesses or worksites; therefore, it’s difficult for national office employees to answer these questions without a thorough safety and health audit at the employer’s location.

Fortunately, OSHA supplies a tool to assist employers in the task of identifying common hazards. The OSHA Hazard Awareness Advisor, which can be found at the OSHA Website ( is a software application that can help employers determine for themselves which hazards may be present at their workplace, and the standards they need to consider to address these hazards. It won’t identify every possible hazard or standard that an employer should know, with 100% certainty; but it does provide a systematic process for initially surveying the workplace and work activities for potential hazards.

Employers of any size may also be interested in the Compliance Assistance Quick Start page at the Website which provides an introduction to OSHA materials to help employers develop a strong safety and health program for their businesses. The information is categorized into General Industry and Construction. Each category provides a “quick start” for the different steps in developing a safety and health program. This page also contains information on safety outreach to Hispanic workers, including OSHA material translated in Spanish.

Another OSHA resource useful for any business, but small businesses in particular, is the Compliance Assistance Specialist. Located in each of OSHA’s local area offices under federal jurisdiction, these safety and health professionals can answer general questions about OSHA and OSHA standards and point employers to other appropriate resources. There is more information on Compliance Assistance Specialists and how to contact the local office on the Web.

The OSHA Small Business webpage, , contains a wealth of helpful information for smaller employers. This webpage provides links to OSHA material most popular with small businesses, including links to publications, free computer software, and consultation services. It also includes a link to the webpage for the OSHA Office of Small Business Assistance (found at ). This serves as a point of contact between OSHA and small businesses nationwide.

Though these resources are useful, some employers may wish to obtain more comprehensive, personalized and hands-on help. The agency offers a free onsite consultation program for these employers. This program allows employers a one-year exemption from routine OSHA inspections; however, employers using the service must agree, before the initial consultation, to correct any serious safety and health problems found.

The service is confidential %%MDASSML%% company and/or employer’s name, hazards found or any other information about the workplace will not be routinely reported to OSHA. Even companies in state plan OSHA states can use the service.

The materials above are just some of the many tools OSHA provides for businesses to use in setting up their safety and health programs. One final tool is available to make an additional case for safety %%MDASSML%% an economic case. The Safety Pays interactive assistance tool helps estimate the impact of occupational injuries and illnesses on a company’s bottom line. Does safety and health add value to your business? Go to for some examples.

Resources from OSHA

Hazard Awareness Advisor:

Small Business:

Office of Small Business Assistance:

Safety Pays:

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me