Growth, hiring on the rise in valve industry

VMA reports positive trends at its 75th anniversary meeting

10/07/2013


The valve industry employs 50% more people than a decade ago, provides great jobs and is expecting to add many more this year, reported the Valve Manufacturers Association (VMA) during a briefing at its 75th anniversary Annual Meeting in Palm Beach, Fla.

During the meeting, VMA unveiled the Employment Snapshot Report, new member research that provided insight about industry employment and discussed new trends affecting the economic outlook of the valve industry. 

“Valve manufacturers are the backbone for many other industries and a bellwether for the economy. It’s great news that so many of our members are increasing their workforces. That means other industries are working too,” said VMA chairman Mark Cordell, president of Distributed Valves for Cameron Valves & Measurement.

More than half of responding member companies reported their domestic hiring was growing up to 5% this year. Nearly one-fifth expected growth up to 10% and another fifth is planning to grow their ranks up to 16%. Only 3% of valve manufacturers did not expect any growth.

These workforce figures are consistent with the increase in shipments that members anticipated, as reported in VMA’s annual market forecast released earlier this year. The forecast report predicted that shipments for the U.S. industrial valve industry would grow 3% in 2013, increasing to nearly $4.3 billion. The increase would mark the fourth consecutive year of growth following the recession, exceeding the industry’s previous 10-year peak in 2008.

Through the Employment Snapshot survey, VMA estimates that the domestic valve industry (including Canada) employs more than 30,000 people, a 50% increase from a decade ago. Overall, the industry has a seasoned workforce, with employees averaging 13 years of experience and that are 43.3 years old. In addition, 26% of their employees have college degrees, and 33% are considered exempt employees.

Also, a majority of these firms—two-thirds of which are privately held—have international locations and employees and most have plans to grow their international workforce over the next five years. In fact, 30% of these firms expect more than 10% growth in their international workforce over this time period. China was the most frequently cited location of internationally-based employees, followed by the United Kingdom and Germany.

“We are growing and hiring, but the industry is also graying so keeping up with our talent needs will become more and more important for our members. In particular, many members continue to express concern about being able to attract enough young qualified workers and skilled labor such as welders and machinists,” said VMA president William Sandler.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me