Four steps to strengthen Lean leaders who lack people skills

Managers need feedback from employees to understand how they can improve.


Supervisors who develop their leadership skills help provide workers with the confidence to better perform their own jobs. Image courtesy: CFE MediaFirst, Sue quit. Then, Laura quit. Then the team sent a letter to HR complaining about Joe. The letter then went to the president of the company. Uh oh.

After investigating the situation by talking with everyone, it's clear that people appreciate Joe's knowledge of the industry, and he's really good at problem solving by himself. The issue is that people on the team feel stifled and disrespected. Joe also has a tendency to take his stress out on his team, and they are getting more and more upset by it. By now, they feel like they've raised the issue a few times, and no one is listening. What should they do?

Over the years, I've had many leaders identified as needing to build their people skills. They often are some of the most valuable team members in terms of their technical abilities and length of time in the industry, but their teams don't like working for them. In fact, the greater the lean transformation, the more dissatisfied the team members become with these leaders.

Why is that? All continuous improvement cultures are founded on empowered teams that are able to solve problems and be coached through a range of skill-building behaviors that make them independent of management. This type of workforce management absolutely requires advanced people skills. Many companies don't have an extensive number of managers at all levels who possess these skills.

When embarking on a course of action to improve a manager's people skills, you will need to lay out the plan up front with the manager so he knows what to expect. It's important to be empathetic and kind, as the situation can be one of the more painful experiences the manager has been through. Finding out your team is complaining about you and that your job may be in jeopardy is scary for anyone. A manager in this situation will typically feel alone and disappointed in herself. While some may lash out, it is important to understand that they are simply trying to protect themselves. Here are four steps that can be used to address this issue.

Step 1. Obtain feedback on how the manager is seen by people around him. Include the employee's manager and peers as well as other staff members. It is very possible that the person in question exhibits behaviors that she isn't even aware of but that the entire team has observed. You can obtain this feedback with a written survey or simply gather feedback through in-person interviews.

Step 2. Establish specific behaviors from the feedback that need to be addressed. Once you've sorted out the feedback, develop a list of three to five areas that are specific and actionable for the manager to work on. You will need to coach the manager and encourage him to be truly open to the feedback, listening without commenting and withholding a response until he has had time to think about it. Typically, a 24-hour hold is a good idea. Once the specific areas are identified, the person needs to establish a practical and meaningful approach to work on the areas. Anytime these are related to skills the person struggles with, just trying to do better isn't enough.

Step 3. Encourage the manager to obtain support to assist in the effort. Leaders need support to go through this gamut of changes. Obtaining feedback can be challenging and scary. Interestingly, teams will often shift from complaining to helping once they see a leader who is truly working on her people skills.

Step 4. Ensure the improvement effort is long-term as behavior changes take time. Commonly, companies stop addressing performance issues once there is any relief from complaints. With this approach, problem behaviors are likely to return. In addition, having just the absence of some of the more extreme behaviors is likely not sufficient for effective leadership. Ensure there is adequate setup that will last at least a year.

Also, schedule follow up sessions to check on how the action plans regarding the -three to five improvement areas are on track and progressing. One way to verify improvement is to re-interview the team members to find out what changes they are observing. The manager can do this exercise himself to maintain his own sense of ownership of these issues.

When it's all said and done, many times these efforts don't succeed because the manager may not really want to change or improve. On top of that, she can become so self-conscious or defensive that she struggles to get to the issues that need attention, much less address them effectively. However, if these types of thorough performance improvement steps are followed, leaders are able to turn the corner for the benefit of themselves and their teams.

— Cheryl Jekiel is the author of "Lean Human Resources: Redesigning HR Practices for a Culture of Continuous Improvement." This article originally appeared on Association for Manufacturing Excellence. AME is a CFE Media content partner.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me