Hazardous Location Connectors

Mencom Hazardous Location Connectors series is designed to meet stringent electrical requirements for protection under Class I Division 2 environments and certified by Underwriters’ Laboratories (UL). ‘Class I’ is defined as a hazardous location in which flammable gas or vapor may be present in sufficient quantities to be considered ignitable or explosive. ‘Division 2’ is defined as an area that is not likely to contain dangerous concentrations of flammable substances in closed containers. Common Class I Division 2 hazardous locations include refineries, utility gas plants, coal mines, and liquid-gas storage facilities.The part numbers for the hazard location connectors will have an ‘H2’ prefix (e.g. MIN-3FP-3 becomes H2MIN-3FP-3) that distinguishes them from existing Mencom SKUs. These connectors are available for most Mencom circular connectors series such as MIN & PMIN Series, MIL-SPEC series, M23, M12, NAN M8, and Networks. They are rated IP65 (minimum) to IP67 (IP69), providing complete protection against ingress of dust, water jet, and steam. Their rugged structure with quick connect and disconnect design greatly increases installation speed without the use of special tools while providing more secure connections than hardwiring alternatives against machine vibration. For more information, contact the factory or visit www.mencom.com.

Written by

Mencom Corporation

Founded in 1987, Mencom Corporation provides high quality, cost-effective solutions that meet industrial electrical connector requirements. Our highly trained staff of experts utilize decades of electrical and electronic industry-related experience to develop the highest quality products available.In addition, this vast expertise allows us to assist OEM customers in selecting the best products to meet their unique connection requirements. This ensures our customers receive the most cost-effective solution possible, plus one that requires minimal installation time, reducing the customer’s total installed costs. Mencom offers a complete line of custom-made and off-the-shelf electrical connectors.Our product line includes:Molded cables and receptacles for sensors and actuatorsMINI, M23, M12, M8, Micro-AC, Euro AC, Device Net, Profi-bus, Foundation Field-busMulti-pin industrial rectangular connectors for power and data linesPanel Interface Connectors for safe and quick reprogramming requirementsDIN solenoid valve connectors for solenoidsJunction Blocks for power & signal distributionMulti port connector plates for multiple connections in a small spaceConduit adapters for distribution of power & signal using conduitEthernet connectors & switches for communication with a networkA wide variety of metric, PG and NPT cable glands, fittings and adaptersMencom is also the North American Master Distributor for ILME rectangular connectors.