Verifying the value of Lean Six Sigma programs

To achieve and maintain a competitive position in today's turbulent economy, companies are pursuing a variety of different business improvement initiatives. As long as the enterprise is pursuing continuous improvement, does it really matter which of the various methodologies, ideologies or programs are followed? The short answer is a resounding, “Yes.


To achieve and maintain a competitive position in today's turbulent economy, companies are pursuing a variety of different business improvement initiatives. As long as the enterprise is pursuing continuous improvement, does it really matter which of the various methodologies, ideologies or programs are followed?

The short answer is a resounding, “Yes.”

Aberdeen's 2009 survey of more than 600 business executives finds that those following the true rigors of Lean Six Sigma are better equipped to improve operational performance.

Lean Six Sigma is indeed a tough and demanding program, but when followed with the intended rigor and attention to its finer points, it yields demonstrable results that can be measured in millions of dollars and double digit improvements in profits, quality, and cycle times.

Other continuous improvement and operational excellence programs simply do not produce the same results.

Names aside, it is the true rigor of a Six Sigma program that seems to make the biggest difference.

For those who indicated in the survey that they had Six Sigma programs in place, we asked several other questions to further qualify them, and defined a category we call “True Six Sigma.”

Only 43 percent of those with Six Sigma programs in place qualified for the label “True Six Sigma.” But those that did were far more likely to outperform their peers.

Although we collected data on the average financial result from individual projects, as well as the total financial gains from the start of the initiative, we chose the financial results achieved in the first two years to drive our Best-in-Class criteria. By doing this, we smooth out the difference between newer and very mature implementations.

During the first two years, most companies look for low-hanging fruit in order to produce some immediate and tangible results. Where costs and processes are wildly out of control, these early results can be enormous… and easily gained. For this reason, we temper these savings with the ability to drive those results to the bottom line and improve profits, quality and cycle times.

While we did not require the use of Lean Six Sigma as a criterion for the Best-in-Class, our results clearly show that these management strategies produce more business improvement— and preserving the rigor of Six Sigma produces even more consistent and dramatic results. While all those using Six Sigma and Lean Six Sigma were 1.4 times as likely to be top performers, those respondents that fell into the category of True Six Sigma were more than twice as likely to achieve Best-in-Class status.

By simply comparing the average financial results gained by the Best-in-Class and even the average True Six Sigma program, it's apparent that millions of dollars in savings can be produced.

Manufacturers that have previously confined Lean and Six Sigma efforts to the plant or shop floor should continue their journey to business improvement by bringing the same concepts to front and back office processes. Those in non-manufacturing industries that have yet to begin this journey are encouraged to take those first steps in the journey.

To obtain a copy of the full results of our benchmark visit:


Author Information
oversees research and client development related to manufacturing at Boston-based AberdeenGroup, and has more than 30 years worth of ERP and supply chain-related experience. Cindy, a former director for a prominent enterprise vendor, has authored numerous white papers as well as a book titled, ERP Optimization.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me