The sound of efficiency: Harman tunes up its product development processes

It’s unlikely that even the most informed audio equipment buyers realized that until recently the Harman Specialty Group’s product development methods were less than state-of-the-art. That changed when the group adopted a formal set of product life-cycle management (PLM) processes.

09/26/2007


Most audiophiles know the name Harman . Many of them also know
It’s unlikely, however, that even the most informed audio equipment buyers realized that until recently, Harman Specialty Group’s product development methods were less than state-of-the-art. That changed when the group adopted a formal set of product life-cycle management (PLM) processes.
“We were looking for ways to reduce product development time, improve accuracy and efficiency, and
A crucial step was installing a PLM system from Omnify Software .proved vendor lists (AVL) existed in different file formats stored on various servers throughout the company.
“Finding documents could take days,” Scott says. “Often, the documents didn’t exist, existed only on paper, or existed in a state where the accuracy of the file was suspect.”
Engineering changes presented more challenges. While documents relating to engineering change orders (ECO) were printed and manually routed for review, only people in the document control group actually understood how the engineering change review process worked. The design team members had no way of knowing the status of a change, or even where documents should be routed next.
Additionally, there was no formal procedure for notifying other reviewers whenever someone revised an ECO. Manually processing this information resulted in a number of change requests simply not being completed, without creating any record of why the projects had stalled.
Douglas says this led to the conclusion that Harman needed a unified system to manage, track, and store product information.
With the
Consequently, Harman employees can easily and quickly link all of the associated data with every part—including vendor datasheets, fabrication and assembly drawings, and programming files.
The processes of creating new parts or making changes to existing parts are now completely automated and supported by electronic documentation and workflow technology.
When new parts requests (NPR) are created, for example, the Omnify system immediately generates a new part number. The appropriate people also receive messages on their desktops, notifying them to go into the system to review the part number and an accompanying description, and sign off on the
Previously, the document control group created the part numbers and descriptions, and then routed paper documents containing that data through a cumbersome, manual sign-off process.
The Omnify System also streamlined Harman’s ECO process. All team members can check the status of an engineering change at any time. In addition, the change history tracking in Omnify allows users to see what was changed, why, and who made the change. This capability has established a level of accountability that did not exist before, Douglas says.
“The sign-off process for ECOs is now as short as a few hours, compared with the previous paper process that could take weeks,” Douglas adds.
Harman management has to like the sound of that.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me