Revolving door: Retirement boom already shifting job roles in current manufacturing models

To ensure the healthy future of the manufacturing industry, it’s critical to know which employees possess the knowledge to train the future generation of manufacturing workers. Employee assessments mitigate risk by allowing employers to accurately determine employees’ ability, job mentality, and confidence levels.


The manufacturing industry has long been a cornerstone of the American economy. According to a study conducted by The Industrial College of the Armed Forces , it is the fourth-largest contributor to the country’s economic growth, accounting for 22 percent of the gross domestic product growth at the time of the study.

Manufacturing also has a direct impact on the health of other industries on both sides of the supply chain. It creates huge demand for raw materials provided by companies ranging from lumber mills to steel refineries to plastic plants; and its products affect industries spanning the spectrum of health to high-tech to retail and beyond. The viability of the manufacturing industry affects not only those working in the field, but the health of the economy as a whole.

As baby-boomers begin to retire, the manufacturing industry is faced with the fact that its knowledge base is about to walk out the door. According to Nielsen Research data, manufacturing executives should expect approximately 40 percent of their skilled workforces to retire within the next five years. For manufacturing companies with annual revenues ranging from $10 million to $1 billion, it will mean an average loss of $52 million per company, with losses for larger companies reaching closer to $100 million.

Large manufacturing companies aren’t the only ones that will be affected by this trend. The National Association of Manufacturers says approximately 20 percent of small to medium-size manufacturing companies—with 2,000 workers or fewer—reported that retaining or training employees is their No. 1 concern.

So what can manufacturers do to ensure their security in these unsure times? One step is gaining a clear picture of who in the workforce is best suited to pass on knowledge before leaving the industry for good.

It is vital that manufacturing executives make every effort to pass along critical knowledge now, before the masses of skilled baby boomers make their exit. Employee-assessment programs represent an invaluable tool for determining who can best help pass on this knowledge, and identify the right people in the industry to assume more responsibility and fill the shoes of the retirees.

Not everyone is prepared to train the future of the manufacturing workforce. While most seasoned manufacturing employees will possess extensive industry knowledge, not all of them will have the ability and the confidence to pass this knowledge on in an effective manner.

And just because someone has an understanding of a subject matter doesn’t mean they will be able to teach it. Customized employee assessments can determine who is best suited to train newcomers because they measure competence and knowledge in conjunction with confidence. Assessing confidence along with knowledge is a key aspect of a successful employee assessment program because this approach provides executives with a more complete picture of their workforce.

In addition to the effects that the aging workforce will have on industry newcomers, it’s likely that the upcoming retirement boom will create a shift in the job roles of many current manufacturing workers. As thousands of seasoned workers leave the industry there will more vacancies in high-level positions. This likely means workers currently holding lower-level positions will be receiving promotions and moving up the ranks.

Employee-assessment systems can be helpful in this situation to determine who is most capable of taking on more responsibility. It could be a potentially costly mistake to promote someone who doesn’t possess adequate knowledge, confidence, and competence to succeed at a higher-level job. Employee assessments mitigate risk, allowing employers to accurately assess both employees’ ability and their confidence in that ability.

The impending retirement boom is not a problem that will go away. Ensuring the proper knowledge hand-over is one of the most important steps manufacturing executives can take to preserve the health of their companies, the industry, and the economy as a whole.

Related links:
MBT : A skilled yet aging workforce sees wages squeezed by globalization
USA Today : Small manufacturers desperately seek skilled staff

About the author: Mary J. Clarke, chief executive of employee assessment solutions specialist Cognisco , has extensive sales & marketing experience in the technology industry, in both software & services organizations.allowing employers to accurately assess both employees’ ability and their confidence in that ability

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me