Building a better warehouse instead of a bigger one

Sovena USA was able to address space issues within its operation without adding any more bricks or mortar.

08/31/2012


Jeff Leclau, warehouse manager, Sovena USAAs the country’s largest importer of olive oil, Rome, N.Y.-based Sovena USA has seen its business grow in recent years. The company was looking to expand its operation and had room to grow the physical space, but looked for another solution. Working with supplier Pengate Handling Systems, a Raymond Corp. supplier, Sovena was able to address this space issue without adding any more bricks or mortar. Key members of the team that put this project together talked about how to look at space in a new way.

Jeff Leclau, warehouse manager, Sovena USA: Even with an 180,000-sq-ft facility, we struggled to find a way to expand. Initially, it was challenging for our organization to determine whether to expand our facilities or to find a way to optimize our current space. While we had the capacity to expand, we were looking for the most advantageous way to accommodate additional importing and distribution needs.

In working with Pengate, we were able to optimize our current location by implementing a very narrow aisle (VNA) concept, tearing out all the existing racking and installing narrow aisle bench storage and pushback racking. We also were able to improve our material handling flow by segregating and storing like items or types together, which has allowed us to store more goods on-site and eliminate the needs for an offsite warehouse. As a result our lift truck travel time for picking and putting away orders has decreased, therefore increasing our efficiency.

Randy Belliboni, executive vice president, Pengate Handling Systems: When Sovena turned to Pengate for its restructuring needs, Pengate had the option of expanding the company’s current space or utilizing the existing warehouse more efficiently to accommodate its increased business needs. Over several months Pengate worked with Sovena to understand the product flow, lift truck velocity needs, and increased storage requirements in order to make the proper recommendation to either expand or maximize the existing building.

Narrow-aisle racking allowed Sovena USA to expand its existing warehouse capacity without expanding its physical space. Courtesy: Sovena USAThe new layout achieved the increased number of pallet positions needed to keep up with increased business levels. Pengate and Sovena were able to measure the ROI by monitoring the increased pallet moves, productivity, and storage capacity. The company also was able to project a return on its initial investment within 3.75 years.

Leclau: The decision to improve our current layout and operational plan was based on the input of two teams. Team A had to keep the footprint the same while doubling the space (pallet positions). Team B was given the task of designing a physical expansion that would accomplish doubling the space the same as Team A. In the end, Team A won out, especially because the bigger building would have resulted in an increase in costs, such as income taxes.

Pengate played a key role in helping us make this decision. Our goal was to be able to accommodate a growth rate of 10% to 15% over the next 4 to 5 years. In assisting our team in making this decision, Pengate conducted facility visits, guided various input sessions, and presented what it thought was the best solution for our business. From there, our team collaborated with Pengate to finalize the solution and moved forward with a reconstruction that would service about 15,000 positions.

It was Pengate’s unique understanding of our business, from finished goods and raw materials to the loading and unloading of our materials, that gave it the edge.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me