Ingersoll Rand

Articles

Mechanical & Electrical May 11, 2018

Dual-purpose winches used to improve material, personnel safety

Dual-purpose winch series moves onshore rig material and personnel safely to save rig floor space for oil and gas applications.

By Ingersoll Rand
Environmental Health August 24, 2017

Next generation air compressors

The Next Generation R-Series 200-250kW line of rotary screw air compressors is designed to improve overall system efficiency for customers with high-capacity air requirements.

By Ingersoll Rand
Compressed Air June 18, 2017

Rotary screw air compressor series

The RS185 to RS260 oil-flooded rotary screw air compressors provide a more energy-efficient solution for customers with high-capacity air requirements.

By Ingersoll Rand
Mechanical & Electrical May 2, 2017

High-torque tool

The QX Series Cordless Torque Multiplier is a high-torque fastening tool for industrial applications that employs advanced technology to ensure accurate, repeatable bolting for torque-critical joints.

By Ingersoll Rand
Mechanical & Electrical September 2, 2016

Mid-range turbine air starter

The ST150 turbine air starter with 47 horsepower aluminum motor is designed for fast starts on mid-size, heavy-duty diesel and gas engines.

By Ingersoll Rand
Environmental Health August 23, 2016

Rotary screw air compressors

Rotary screw air compressors with variable speed drive that increases energy efficiency by up to 35 percent.

By Ingersoll Rand
Mechanical & Electrical May 9, 2016

Ultra-compact impact tools for technicians

The 35MAX and 15QMAX Ultra-Compact ImpactoolsTM that technicians and operators can use to quickly loosen or tighten a variety of fasteners in confined spaces.

By Ingersoll Rand
Compressed Air September 12, 2015

Geared centrifugal compressor for various applications

The Turbo-Air NX 8000, a geared centrifugal compressor, features lubrication and cooling systems designed to optimize flow and efficiency.

By Ingersoll Rand
Compressed Air August 18, 2015

Rotary screw compressor

The UP6S rotary screw compressor series is designed to power pneumatic tools and equipment and can operate in harsh environments.

By Ingersoll Rand
Energy Efficiency & Management December 1, 2011

HOC dryers

New line of heat-of-compression (HOC) dryers

By Ingersoll Rand
All Articles

Products

Machinery and Equipment December 13, 2022

Pneumatic Belt Sander

The 360-313 and 360-418 Pneumatic Belt Sanders—engineered to make quick work of material removal and deliver smooth finishes. Whether removing spot welds, rust, deposits, or burrs; or fine-tuning a finished surface, these tools get the job done fast with a 0.6HP motor - 20% more than the leading competitor. Increase your productivity with tool-free belt changes (either 3/8" x 13", or 1/2" x 18") that make switching from one abrasive to the next quick and convenient, as well as a tool-free articulating arm that ensures every nook and cranny is easily reached.

Ingersoll Rand
Machinery and Equipment November 8, 2022

135MAX Heavy Duty Air Hammer

When maximum power is a priority, the Ingersoll Rand 135MAX Heavy Duty Air Hammer makes quick work of tough tasks including exhaust and front-end jobs, cutting stubborn bolts and building or de-constructing control and knuckle assemblies. Weighing in at 4.5 pounds (2.03 kg), the 135MAX HD Air Hammer delivers a best-in-class 2,600 blows per minute (BPM), with a 3” piston stroke. Ideal for vehicle, truck, bus and heavy machinery repair, the tool is also well suited for maintenance, repair, and operations (MRO).

Ingersoll Rand
Predictive and Preventive Maintenance October 25, 2022

320PG Pencil Grinder

The Ingersoll Rand 320PG Pencil Grinder has countless capabilities to complete more tasks with one single pneumatic tool. Use it for precision grinding in small spaces, final cleaning, polishing dies and flash removal applications. This tiny tool can do it all and is compatible with carbide burrs and mounted points. A slip resistant, custom thermoplastic polyurethane (TPU) grip helps technicians work precisely for extended periods of time.

Ingersoll Rand
Predictive and Preventive Maintenance October 25, 2022

140EP Engraving Pen

The pneumatic Ingersoll Rand 140EP Engraving Pen is easy on the hands, with a slender, ergonomic shape and soft rubber grip that makes it ideal for long periods of use. Designed with durability in mind, the 140EP pen legibly engraves hard surfaces, from alloys to brittle ceramics, with ease and accuracy. Operators can comfortably and clearly make marks and labels for long-lasting identification.

Ingersoll Rand
Machinery and Equipment June 27, 2021

W9691 1” Cordless Impact Wrench

Power, mobility, and productivity are enhanced with the W9691 Series 1” Cordless Impact Wrench, the world’s most powerful 20V 1” cordless impact wrench.  With 3,000 foot-pounds of nut-busting torque to handle stubborn bolts, it boasts the best power to weight ratio in its class, allowing technicians to move about freely where space and maneuverability are at a premium. Further, cordless mobility brings added safety by eliminating hoses and tripping hazards to keep technicians safe and is the perfect solution for roadside vehicle service applications.

Ingersoll Rand
Material Handling January 15, 2020

Zero Gravity Air Balancer Control Kit

The Ingersoll Rand® Zero Gravity Air Balancer Control Kit is an air balancer control kit that can be installed on Ingersoll Rand air balancers to increase operator comfort and balance loads without adjustment. The Zero Gravity Air Balancer Control Kit inline handle replaces the need to use an up-and-down button to position the lift. The device uses the appropriate air pressure to support the lift load through innovative monitoring and valves, balancing the exact weight in real-time. Operators can simply lift the item up or down via the handle once the load is lifted and stabilized, increasing productivity, operator comfort and maneuverability. Available as a retrofit on any Ingersoll Rand air balancer or as a packaged unit with the balancer, the Zero Gravity Air Balancer Control Kit is easy to install and maintain. The Zero Gravity Air Balancer Control Kit also comes standard with three programmable inputs and outputs to control a variety of different handling devices and offer operators the versatility they need in their facilities.

Ingersoll Rand
Oil and Gas February 8, 2022

Ingersoll Rand Arctic Range Blowout Preventer (B.O.P.) Handling System

The Ingersoll Rand® Arctic Range Blowout Preventor (B.O.P.) Handling System safely transports and handles B.O.P. stacks in ultra-low temperatures. This specially designed system can operate at temperatures as low as -45º C while handling a working load weighing from 20 to 40 metric tons. Ingersoll Rand designed the Arctic Range B.O.P. Handling System for the specific needs of rig operators in the Arctic, giving them powerful and reliable equipment in hazardous, cold weather environments," said Gus Caldera, Global Leader, Business Development for Ingersoll Rand.

Ingersoll Rand
Oil and Gas October 12, 2021

Subsea Hydraulic Hoist

Ideal for tough and unusual applications above deck and underwater, Ingersoll Rand's Subsea Hydraulic Hoist for ship repair and ship husbandry, salvage and recovery operations, subsea maintenance and repair operations, and decommissioning subsea structures. Operators can use the Subsea Hoist at depths of up to 30 meters underwater, where repairs or maintenance are often needed. “The Ingersoll Rand® Subsea Hydraulic Hoist allows people to make underwater repairs at dock or while at sea.

Ingersoll Rand
Machinery and Equipment June 27, 2022

2955 Series Impact Wrench

The Ingersoll Rand® 2955 Series 1½" square drive Impact Wrench delivers heavy duty power, durability, and productivity at an unmatched economic value. The 2955 Impact Wrench produces a competition-leading 4,500 foot-pounds of max reverse torque powered by a finely-tuned, warm-forged twin-hammer impact mechanism. Steel hammer case with aluminum motor housing and handle provide durability, while steel endplates resist wear.

Ingersoll Rand
Machinery and Equipment March 21, 2022

5100 Series Random Orbital Sander

Ingersoll Rand's latest addition to its sanding portfolio is the Ingersoll Rand® 5100 Series Random Orbital Sander. Harnessing a 0.3 horsepower motor, the 5100 Series is more powerful than its predecessors and produces a fine, swirl-free finish while removing material faster, saving technicians time and increasing their productivity. The 5100 Series generates an impressive maximum free speed of 12,000 revolutions per minute. Its randomized orbits tackle a range of applications including removing heavy material to fine finishing.

Ingersoll Rand
All Products