Digitizers for wideband applications

The M4x.22xx series digitizers are designed for automated testing applications where wideband electronic signals need to be acquired and analyzed.
By Spectrum December 5, 2016

The M4x.22xx series digitizers are designed for automated testing applications where wideband electronic signals need to be acquired and analyzed. Courtesy: SpectrumThe M4x.22xx series is designed with modules that offer one, two, or four fully synchronous channels. Each channel is equipped with its own analog-to-digital converter (ADC) with real-time signal sampling and scope-like signal conditioning circuitry. The digitizers are designed for automated testing applications where wideband electronic signals from DC to the GHz range need to be acquired and analyzed. The front-end circuitry of the M4x.22xx series digitizers is complemented by a trigger system, an on-board acquisition memory, and a host of data acquisition and readout modes. Trigger events can be time stamped to know exactly when they occurred. All the M4x.22xx series digitizers are packaged in a dual-width 3U module which incorporates a four-lane PCI-Express Generation 2 interface. The M4x.22xx series digitizers are also optimized with on-board calibration, a clocking system, and FPGA-based firmware.

Spectrum

www.spectrum-instrumentation.com