Tips on improving eye wash safety procedures

Honeywell study touts better understanding of eye wash safety solutions

01/14/2014


In its recently-released whitepaper, Honeywell Safety Products announced the results of a comprehensive study on eye wash safety practices and procedures in the event of an accident. The paper also looked at industry awareness on the subject of eye wash safety, including the prevailing American National Standards Institute's (ANSI) standards (ANSI Z358.1). 

Honeywell's recently released whitepaper looks at eye wash procedures. Courtesy: Honeywell.

Plant Engineering discussed the study’s finding and the issues around eye wash safety with Kelly Piotti, senior product manager for emergency eyewash, Honeywell Safety Products.

PE: Leaving aside the ANSI standard for a moment, what’s the No. 1 mistake manufacturers make when it comes to eye care?

Piotti: The No. 1 mistake manufacturers make is having insufficient eyewash—either the wrong type for the hazard or too few stations within a plant.

PE: How much of the issue of eye wash safety is top-down management, and how much is peer-to-peer enforcement? What are the challenges in each one? 

Piotti: It is a little of both. Sometimes emergency eyewash is overlooked due to cost constraints, and that’s a top-down problem. Other times it is due to a lack of understanding of the standard, either at the top or among peers. For instance, some safety managers feel that if they have one station per a certain number of square feet then they are in compliance. In reality, the number of stations should be based on the number of hazards located in the area and the distance between each hazard and an eyewash station. 

Eyewash must be located within a 10-second walk from the hazard with no obstructions, including stairs. In each case, a basic understanding of the safety standard is the key to promoting proper eyewash implementation, and it’s extremely easy to meet compliance with today’s variety of portable stations.  

PE: Beyond strategies, the Honeywell whitepaper cites a difference in the eye wash solutions themselves. What are some of the things to be aware of when working with different eyewash solutions? 

Piotti: The first step to safe flushing is to ensure you are using an FDA-approved product that meets all good manufacturing processes for ophthalmic use. Saline is manufactured for many different purposes, [and] when it comes to the eyes you want to make sure it meets ophthalmic standards. This will aid in a faster recovery and ensure there are no additional complications, such as those caused by contaminants or harsh flushing conditions. 

Another type of flushing fluid to be aware of [is] those claiming to neutralize chemicals. Safety managers should be aware of the types of chemicals they are intended to neutralize, as the fluid could adversely react if used to treat eyes injured with chemicals beyond their intended use.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me