Put chronic gabbers in their place

If it's true that "the business of business is business," then the bottom line key is productivity.


If it's true that "the business of business is business," then the bottom line key is productivity. As any experienced manager could confirm, if there's one thing that kills productivity, it's the not uncommon corporate disease sometimes referred to as "diarrhea of the mouth."

Supply Room Attendant Pauline Pfister ran a one-woman operation and was famous -- or infamous -- for her talkative tendencies. Whether on the transmitting or receiving end of a phone call, it was hard to get her off the line. Although otherwise good at her job, her longwindedness was the bane of Maintenance Supervisor Joe Lehman's existence. He had called her on the carpet more than once to complain.

Lehman's "last straw" decision occurred when he was unable to get through to the supply room to determine if a set of special wrenches was available. Exasperated, he made the 10-min trek to the supply room. Sure enough, Pfister was still on the phone, gabbing away as if she were at home in her rec room. At sight of her boss, she quickly put an end to her talk and hung up.

Lehman said through tight lips, "I've had it with you, Pauline. You can clock out. Your final check will be mailed to you."

Pfister was dumbfounded. "I was only..."

Lehman didn't hang around to listen. He put through a termination notice for Plant Engineer Phil Trapp to okay.

Question : Is Pauline's dismissal justified?

Trapp's decision: Plant Engineer Trapp summoned Lehman to his office. "This comes as a surprise," he said. "I thought Pauline Pfister was a good worker."

"She knows her job," Lehman conceded," but doesn't know when to shut up. I don't know how many times I talked to her about yakking on the job and tying up the phone."

"I checked her file and see no indication of that other than a couple of notations."

"Today I decided to carry it a step further"

"That's not good enough, Joe. She received no official written warnings so far as I can see, and no suspensions. A few oral complaints aren't sufficient to warrant the ultimate discipline. As a good longtime worker, Pauline deserves more of a chance to reform. You also have to make it clear to her on a progressive basis that a failure to cut out her excessive gabbing could lead to dismissal."

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me