Microgrids drive a new energy strategy

Energy master planning provides a bridge to the future by using microgrids to help manufacturers integrate renewable energy resources.


Installations of solar panels and other advanced microgrid programs at Schneider electric’s Boston One Campus in Andover, Mass., is an example of how to incorporate distributed energy into an existing facility. Courtesy: Schneider ElectricThe steady increase in energy usage across North America is forcing users to contend with high and variable energy costs. Total energy production in the United States increased for the sixth consecutive year in 2016, according to the U.S. Energy Information Administration (EIA). During the same period, electricity generation from wind, solar, and other distributed energy resources also grew, ushering in a new energy landscape.

To control future energy costs, improve resiliency, and become more sustainable, plant managers need a plan. This detailed process is often referred to as an Energy Master Plan, comprised of enterprise-level strategies designed to manage energy costs while also mitigating the risk of downtime from power outages.

Microgrids enable manufacturers to adapt to the new energy landscape, driven by greater decentralization, decarbonization, and digitization of energy. Microgrids are an attractive tool to help manufacturers integrate renewable energy resources as part of an energy master plan.

Microgrids are synonymous with allowing customer-sited generation to work grid-tied and independently of the grid. Microgrids also enhance the resiliency of operations while helping manufacturers generate new value, drive benefits in modernization, avoid costs, and meet new shareholder requirements for sustainability and reporting.

No need to "rip and replace"

One of the most exciting trends in microgrids is mixing the old with the new. Microgrids allow for seamless modernization of aging electrical infrastructure, upgrading a facility's legacy electrical system to optimize energy use, without needing to "rip and replace" the existing infrastructure. With microgrids, systems can be implemented to minimize downtime, lower costs, and increase sustainability all in a single project. Energy storage increasingly complements the new distributed resources and doubles as further power system backup for added resiliency.

While battery energy storage systems alone work as an excellent anchor resource, battery systems are still relatively expensive unless they can serve multiple use cases. Where electric power and natural gas are expensive, batteries and solar work well financially. Centralized power is 30% to 40% efficient at the point of use, and cogeneration plants often have a 55% to 80% combined efficiency at the point of use. Through microgrids, manufacturers can leverage cleaner and more efficient resources all while using less grid infrastructure and helping these disparate cogeneration resources work in harmony.

Microgrid systems can be implemented to minimize downtime, lower costs, and increase sustainability all in a single project. Courtesy: Schneider ElectricRenewables also can be used as a less expensive form of generation as they help establish applications of virtual power plants. These applications innovate by combining variable wind and solar with dynamic load management and storage to present a flatter load curve from the utilities point of view. And storage must be thought of as not just batteries, but thermal inertia and flexibility in loads and processes.

Flexibility in microgrid design is of increasing importance because many plants are in off-grid areas of the world—most notably in fields such as energy production, distilleries, or mining—and it's just as pivotal for those facilities to remain functional and cost effective as on-grid enterprises. For many plant managers in remote locations, using renewable energy via a solar-assisted microgrids is more cost-effective than transporting other fuel and establishing new distribution and transmission infrastructure.

New, advanced microgrids couple solar photovoltaic (PV) with other distributed energy resources as an anchor resource to island—or separate—from the grid and enhance resiliency, helping to power campuses and small communities independent of the grid during an outage. In addition to the economic benefits, microgrids also contribute to the sustainability of a corporation.

Many Fortune 500 manufacturers have instituted sustainability goals. In fact, shareholder interest in sustainability is another key factor driving microgrid adoption within the new energy landscape. With an increased commitment to sustainability, shareholders require more renewable energy use than ever, and microgrids help incorporate renewables within their budget.

As sustainability becomes a higher priority, shareholders also are requiring accurate measurement of renewable energy usage. Microgrids can integrate advanced monitoring, software and reporting tools to help provide more detailed, accurate reporting and greater understanding of energy spend and usage across the operation.

Additionally, an increased focus on sustainability enables access to "green funds," which provide lower cost to capital for modernization efforts but are only available for manufacturers and other large corporations that can demonstrate social responsibility, primarily through sustainability.

Shifting to renewable-powered facilities seems simple, however manufacturers often face perceived barriers when implementing renewables with legacy infrastructure that contends with contemporary energy requirements. Greenfield manufacturing projects are rare; manufacturers often need to incorporate solar and renewable energy sources within an existing electrical infrastructure to meet peak loads, build employee engagement and satisfy shareholders.

Finally, modern microgrid tools offer additional autonomy and scalability as plant operators modernize operations. Contemporary advanced microgrid tools bring together hardware, software, advanced controls, and electrical distribution into a single-source solution that simplifies the integration and management of renewables and other distributed energy resources.

Implementing microgrids

Though microgrid implementation can seem daunting for facilities that have been operating the same infrastructure for decades, the industry continues to remove the barriers to entry, making it easier to incorporate renewables and enter the microgrid market. New funding mechanisms such as Microgrid as a Service models enable upgrades without upfront capital expenditure. Through advanced microgrid tools, end-users can incorporate more inverter-based resources that enable renewable energy usage and leverage software solutions to better monitor, analyze and report on energy use while also easing scale.

As plant managers look to modernize their plants in all aspects, the way they source, manage, and control energy cannot and should not be ignored. Microgrids are an effective solution to upgrade electrical infrastructure while helping manufacturers to achieve more sustainable business practices—generating tangible value that can be reinvested in other areas of the operation.

Philip Barton is director of the North American Microgrid Competency Center for Schneider Electric.

The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me