Microwaves and crock pots

To borrow a phrase from the pastor of my church, "I seem to be a crock-pot guy in a microwave world." Everything these days, it seems, has to be faster and faster. I can't agree with speed just for the sake of speed. Nor do I feel guilty about that. I'd just as soon things slowed down a bit, and I think we might all be a little better off if they did.

02/15/2003


To borrow a phrase from the pastor of my church, "I seem to be a crock-pot guy in a microwave world." Everything these days, it seems, has to be faster and faster. I can't agree with speed just for the sake of speed. Nor do I feel guilty about that. I'd just as soon things slowed down a bit, and I think we might all be a little better off if they did.

I just can't convince myself that everything in life — or in business — has to be approached with a sense of urgency, even though that's what a lot of business gurus teach these days. Lots of times, a sense of urgency is listed as one of those qualities necessary to be a successful manager. I understand the concept, but some folks take it too far. Urgency is better than procrastination, but not everything is urgent.

In his autobiography, Jack Welch reflects on his career with GE that "Almost everything should and could have been done faster." My response is, why? Didn't he make enough money? Didn't he build a big enough empire? What would have been the benefit if he had done everything faster?

There's even a magazine out there called Fast Company . My perusal of a couple of issues leads me to believe that the editorial premise is how to succeed in business — fast! And to do that, you have to be hip, you have to be with it, you have to be aggressive. You can't slow down, you can't stop, you can't reflect, you can't think it over, you can't (heaven forbid) sleep on it. Sound bites are good; bullet lists are good. Anything that speeds a process or career is good. Never mind a thorough understanding or analysis. Ride the waves.

Ancient wisdom tells us that for everything there is a season. But the modern addendum would be that the admonition is okay only if the seasons are short.

One of the "ancient" problems in maintenance is that there is never enough time to figure out what went wrong. Just fix it — now. If it breaks again, fix it again. Root cause analysis is great, but who has time for it? It's not on the urgent list.

When I think about the pressure to speed everything up, I'm reminded of babies. On the average, it takes nine months to make each one. There's no way to speed that up. If there were, some expectant mother would have discovered it by now. If there was ever anyone with the incentive to speed up a process, it's a pregnant woman.

New ideas and changes are good. But they don't all have to be zapped in the microwave. Sometimes, they need to simmer for awhile in the crock pot.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me