Writing a new book on quality

Bob Vavra comments on Toyota crisis and the impact on manufacturers

03/19/2010


 

They literally wrote the book on quality management - and more than 50 other books have been written about their quality system. Toyota and quality have been synonymous for three decades around the world - and it's been a sore subject for American-based automakers.
Then stories began to emerge in January and February about millions of recalled Toyota cars and trucks after problems with a gas pedal design flaw. Then there were the problems with the world's top-selling hybrid, the Toyota Prius. There were a few folks who probably took some small bit of pleasure in seeing an automaker who had become so identified with quality suffer from what, by any estimation, is a massive failure of quality control.
Let's be clear about a few things at the outset. First, this was a product design flaw, not a manufacturing flaw. The accelerator pedals were poorly installed, they were poorly designed. Yet it is the manufacturing plant that will bear a large weight from this issue, since most people wouldn't make that distinction.
Second, and perhaps most important to this discussion, is that the impact of the recalls and repairs will stretch far beyond Toyota in Tokyo. The recalls shut down Toyota plants in Indiana and Kentucky, idling American workers in the process. These are people who take justifiable pride in the quality of their work. These are American workers who lost wages and benefits through this work stoppage. No one ought to take any comfort in that.
A new book of quality needs to be written, and Toyota is going to be Chapter 1 in how quickly a culture of quality can crack. It ought to be required reading for everyone, because quality of products is by far the most important thing to your customers, according to findings in the 2010 Changing World of the Plant Engineer study we've been conducting for the past two months.
We asked readers around the world what was most important to their customers about the product they make. In the preliminary findings (the full study will be released next month in Plant Engineering) 74% of U.S. plant managers said quality was their customer's top priority. Only 23% said price and just 3% said where it was made mattered. The numbers from international manufacturers were almost identical - 80% cited quality, just 15% said price.
What the numbers tell us is that quality should always be at the forefront of any plant's operation. Quality design, quality manufacturing, quality maintenance and quality-inspired management produce quality products. They also produce products at a lower cost to the company, and it produces those products with a lower energy usage and less waste. All of those production costs are today considered intrinsic parts of quality.
That's because however you measure and manage those production costs, if your end product isn't a quality product, you have in effect wasted the time, materials and energy it took to make that product. From children's toys to pharmaceuticals to food, we have seen many examples product recalls that have followed illness, injury and death. Some cases were criminal; many were the results of poor design. Many were the result of poor quality management practices on the plant floor. The victims of those product failures don't much care why. Their lives were altered as a result - sometimes permanently.
The deaths and injuries being attributed to the Toyota recall put a more human face on this business of quality - both its importance when it is followed and its cost when it is not. The issues still to be sorted out will drag out for years as courts and legislators have their say.
But for those in America who manufacture the world's products and those around the world who manufacture products for us, the question we are faced with is more immediate. What did we learn this time?
The cynic might find that Toyota, for all its posturing about quality and "The Toyota Way," was, in the end, no better at quality than anyone else.
That is what ought to really scare us.

 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me