Work overload for female engineer: Any recourse?

Ellen Kramer was an experienced engineer and regulatory issues specialist. When hired 2-yr before to work under Special Projects Supervisor Jerry Bambers, paperwork had been neglected for years.

08/01/1998


Ellen Kramer was an experienced engineer and regulatory issues specialist. When hired 2-yr before to work under Special Projects Supervisor Jerry Bambers, paperwork had been neglected for years. Continued negligence would have meant major fines and penalties for the company. One of Kramer's chief duties was to straighten out the mess.

She worked hard and made a good deal of progress. One day her boss approached her with a special project he said had to be completed in 6 wk. When Kramer reviewed the assignment she couldn't believe her eyes.

"There's no way this could be done in 6 wk."

Bambers shrugged. "The order comes from the top."

"It's impossible." She urged him to negotiate the time frame. "I'll need 8 wk at least."

"I can't do that, Ellen. An order's an order."

"Then at least hire an experienced consultant to help."

Bambers refused that too. Kramer's first impulse was to quit. But she needed the job. In the next 6 wk, Kramer put in 170 hr of personal overtime including weekends, evenings, and two national holidays. Somehow or other she completed the assignment on schedule.

"I told you it could be done," Bambers said casually, when Kramer handed him the 256-p report.

That was all the thanks or recognition she got. The next day Kramer told him she was suing the company.

Bambers laughed. "For what?"

"You'll see."

Question : If you were in this situation, what would you do?

O'Brien's verdict: Plant Engineer Jim O'Brien summoned Ellen Kramer to his office, and got her story confirmed by hard evidence. He called Bambers to his office.

"I don't know what Kramer's chance of winning might be if she sued. What concerns me more is the way she was treated. I won't deny the importance of getting that report out on schedule, but a consultant's help would have been quickly approved under the circumstances. I'm going to thank Ellen personally for the job she did. I'm also going to authorize an extra week's vacation, and put her in for a $500 bonus in appreciation for her service. Finally, I'm keeping a close eye on you, Jerry. Unless you can humanize your treatment of the people who report to you, regardless of sex, creed, or color, you won't be long for this world."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me