Wireless systems featured in demo booth at ISA

15 vendors to show off latest technology

09/11/2007


The ISA100 standards committee, "Wireless Systems for Automation," will host a demonstration booth at ISA EXPO 2007, Oct. 2-4 at the Reliant Center in Houston. The multi-vendor technology demonstration will showcase the major principles of operation of the committee's work, and products from over

The ISA100 standard is being created as a family of standards, designed to support many applications and many protocols through a single, integrated wireless network. The committee's work will also ensure co-existence with other standards operating in the 2.4GHz ISM band. The standard will use a single application layer, providing both native and tunneling protocol capability for broad usability. This will help users protect their installed base investment by adding wireless adapters to existing devices while facilitating an evolutionary transition of their field devices to embedded ISA100.11a wireless.

"I believe that the great work done to date by the ISA100 Committee to develop an open standard will enable a universal wireless platform for field instruments to take advantage of. Much work remains to be done but our main goal remains to create a high-quality standard that is supported by end-users and vendors alike," said Paul Sereiko, President and CEO, AirSprite Technologies , Inc. and Co-Chair of ISA100 Marketing Work Group.

"Government led programs have allowed us, through core research and associations like ISA, to build universal, open standards that help improve industrial productivity by simplifying the adoption of new technologies," said ISA100 co-chair Wayne Manges of Oak Ridge National Laboratory.

ISA100.11a will be the first standard released of the ISA100 family. It is focused on monitoring, alerting, and control for the process industries. The ISA100.11a standard has taken numerous steps to ensure co-existence with other radios operating in the 2.4GHz band. These steps include channel blacklisting, frequency hopping, direct sequence spread spectrum signaling, dynamic power control, low duty cycle operation, clear channel assessment and forced frequency selection.

"The ISA100.11a draft standard's effort has been leveraging existing technology and standards where possible to allow compliant devices to be produced quickly and at a relatively low cost point. To achieve this goal, ISA is working with the IEEE, Foundation Fieldbus, IETF, and other such organizations to coordinate its efforts," said Pat Kinney, President, Kinney Consulting, and Co-Chair of ISA100.11a Working Group.

Over 250 companies and organizations, representing end-users, vendors, integrators, universities, and research labs, are actively involved in the open development of the ISA100 family of standards. "The collaboration between end users and vendors on the ISA100 committee is what will truly make a difference in the end result," said Jim Reizner, Section Head, Corporate Engineering, Procter & Gamble. "There are many end users represented here, and we're all providing input based on our needs and uses to help the committee develop a standard that will work for us."

Companies expected to participate in the ISA100 technology demonstration include AirSprite , Apprion , Arch Rock , Cirronet , Dust , Elpro , Emerson Process , Endress + Hauser, Flowserve , GE , Honeywell , Invensys , MachineTalker , Omnex , Rockwell Automation , SensorLogic , and Yokogawa .

The companies will be showing a wide range of wireless instrumentation and applications in a concept demonstration based on existing wireless technologies.

For more information about ISA100, or ISA EXPO 2007, visit

www.isa.org or call (919) 549-8411.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me