Wireless power manufacturing seen as an emerging market

IMS Research finds infant technology could become a $4 billion industry by 2016 with cell phone application as the key

11/07/2011


Wireless power transmitters which enable wire-free power transfer to consumer devices, are projected to account for 75% of combined transmitter/receiver revenues by 2016, according to a new study on the wireless power industry from IMS Research.

 

Wireless power transmitters are more complicated than receivers due to multiple power conversion stages and additional components, meaning a higher price. While the cost for a wireless power receiver may eventually fall into the $1-2 dollar range (if built into products), IMS Research believes the transmitter cost will remain well above this amount. Current retail prices of transmitters range from $50 to $100. These prices are projected to fall as volumes ramp up and the supply chain matures. How fast this happens will be a critical factor in the maturity of the wireless power industry.

 

Jason dePreaux, a research manager with IMS Research, explains. “Cost is certainly a barrier to wireless power adoption. A popular saying in the industry is that ‘if it were free, we’d see it everywhere’. Obviously that’s not realistic, but with the transmitter there’s only so low you can go.”

 

Wireless power transmitters can range from basic single-zone designs to more advanced implementations which can charge multiple devices. dePreaux adds, “Future transmitter offerings will be more efficient and flexible in terms of device placement. But the availability of low-cost, basic transmitters is just as important in creating an sizable installed base. It would really kick-start the market if a wireless charger were bundled together with a new mobile phone.”

 

Though the wireless power market is still in its infancy, it offers massive potential, especially in mobile phone applications. Currently, wireless power is available as an optional feature, requiring the consumer to purchase both the transmitter and receiver separately from the device. Future plans call for wireless power receivers be built into a host of consumer products and for transmitters to be placed into homes, offices, and automobiles. IMS Research projects that the annual market for wireless power will reach $4.5 billion by 2016.

 

“I still think it is a couple of years away from taking off,” added dePreaux. “There is a lot of R&D going on at the moment on putting wireless power transmitters into automobiles. Yet there are specific considerations, like coil-to-coil distances and transmission frequencies, that will require current wireless power technologies to evolve to meet particular use cases like this. The encouraging sign is that there is a strong dialog among the parties and genuine interest in making it happen.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me