Wireless Operator Panels & Machine Safety (Is There A Design & Build Standard?)

03/24/2010


Wireless operator panels (including cableless) for machine applications have been steadily growing over the past several years. The early versions of these portable operator panels were cabled for power and control/communication which limited their range via the length of the cable. The concept was for a panel builder or engineering group to design and build a conventional operator panel but that it needed to be portable and still conform to the same industry standards and regulations as fixed operator panels. All of these panels typically were custom built to customer or machine requirements. As wireless communications, and related standards such as IEEE 802.11, have evolved over the past decade these largely custom panels are now capable of reliable wireless communication and machine control.

This evolution has continued over the past few years to now include safety related communication and machine control. Meaning - these custom wireless operator panels are now capable of including such field devices as conventional emergency stop actuators (red with a yellow background). And, according to the manufacturers, they’re also capable of realizing and complying with the emergency stop requirements of various domestic and international standards. So, with all this lead in discussion, it’s time for the bottom line question!

Do the suppliers of these wireless (cableless) operator panels with optional safety related functions, many of which are custom panels, need a new design, build, test, and certification industrial standard? Or can they continue to follow existing application standards like:

  • 1. EN ISO 13849-1: 2006
  • 2. EN 954-1: 1996
  • 3. EN 60204-1: 2007
  • 4. IEC 62061: 2005
  • 5. ISO 13850:2006
  • 6. IEC 61326-3-1:2008
  • 7. NFPA 79: 2007
  • 8. Etc.

In my opinion, as long as suppliers are:

  • Following existing safety standards and regulations
  • Performing risk assessments responsibly
  • Obtaining appropriate test validation certificates by NRTL’s (Nationally Recognized Testing Laboratories) for use in safety related applications
  • Following their engineering discipline credo & professional responsibilities

to mention a few - why layer a whole new standard on industry that doesn’t exist today? Don’t we have enough requirements in place in the US today such that the American worker can have a safe work place as required by OSHA?

Please share your thoughts on this controversy!

Further information is available at a Webinar I’m presenting on this topic titled “The Case for Wireless Safety” scheduled for April 28th and the link for registration is -  https://siemens.webex.com/mw0306l/mywebex/default.do?siteurl=siemens

For more on Machine Safety visit: www.jbtitus.com

Posted by J.B. Titus on March 24, 2010



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me