Will your BAS be working in the year 2000?

Like many other plant systems, BASs are susceptible to year 2000 time and date malfunctions. Although products shipped today may be ready to handle the next century, systems already in place may not be.

08/01/1998


Like many other plant systems, BASs are susceptible to year 2000 time and date malfunctions. Although products shipped today may be ready to handle the next century, systems already in place may not be. In most cases, users do not need to fear that the entire BAS will fail, but because many of their operations are time and date sensitive, activities such as event scheduling, equipment cycling, and similar tasks may crash.

- The millennium bug is real, and a coordinated plan to manage year 2000 difficulties is essential. Any program that relies on dates could be confused. The year 2000 is especially challenging for embedded systems that are abundant in building operations. HVAC controls, boilers, chillers, local and wide area networks, building access systems, and similar BAS functions are a few examples.

- The most important year 2000 action for a plant engineer to take is to get started! Ask your BAS supplier to perform a site audit and request a documented response. Be specific. A generic letter is difficult for a vendor to answer. When solutions are suggested, ask for a quote for remedying the problems. If the system is upgraded, users may want to ask for a letter stating that the system is now year 2000 compliant.

- Solutions may be as simple as upgrading software or changing out firmware, or as complicated as total system replacement. Equipment having no upgrade path, for example, may have to be replaced. In some cases, a new system may be justified. If a system has been in place for many years, it may be time for a new one. Interface solutions are often available that let users upgrade their system architecture while keeping many of the existing components. Most vendors want to maintain their legacy products and will work with users who want to keep them.

- It is important to remember that some solutions may defeat the purpose of distributed control because they create a single point of failure on the system. And, some software applications may not be compliant because they depend on the hardware clock in the computer platform. Under these conditions, the PC may need to be replaced. Remember that while most vendors are cooperative about year 2000 problems and see this situation as an opportunity to cement relationships with users, if the price of a solution seems too high, competitively bidding the solution is always an option.

- Other activities to include in the action plan are monitoring the progress of your plan and communicating its progress to all affected employees. There will be surprises. Prepare a backup plan for mission critical processes just in case some of the solutions fail to work.

- Above all, act! Acquire as much knowledge as possible. Organizations such as the Building Owners and Managers Association (BOMA) offer resources and assistance. (See the "More info" section at the end of this article for contact information.) Neither user nor supplier has the capacity to handle all problems between July and December 1999. If you haven't started, the time is now.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me