Why your organization should change from reactive to proactive culture

Most companies talk a good talk and say the right things when prompted, but in the end do not follow good basic principles of equipment and process reliability.

07/03/2014


The word reliability is the buzzword in industries across the world. We often hear statements such as "our company is a reliability based organization" or "we are an RCM organization" or "we are a world class in reliability." Most companies talk a good talk and say the right things when prompted, but in the end do not follow good basic principles of equipment and process reliability. In other words, the basic fundamentals to implement and sustain all of the concepts above have never been established.

Most organizations today live in a reactive culture. They thrive on it and love the hero mentality and firefighting persona that goes along with it. Reacting to a failure or incident appears heroic. This type culture garners accolades, frequent pats on the back, awards and recognition.

So why would any organization want to change from a reactive to a proactive culture? The primary reason to progress into a proactive culture is employee and environmental safety. Reactive cultures are extremely dangerous. Have you ever neglected to replace the worn tires on your car and consequently suffered a blow-out on an interstate? Did you feel safe navigating your vehicle to the road side on three inflated tires? It would have been much safer to replace your tires based on the worn condition and avoided the incident altogether.

When equipment fails, it often fails at the most inopportune time and is dangerous in the process. Incidents of explosion, arc flash, contamination, spillage, chemical release and airborne projectiles are just a few of the results of equipment failure. When your technicians and mechanics rush in to save the day, they may be putting themselves, the plant and the environment at risk.

Dale B. Wilson is a Certified Maintenance and Reliability Professional and is currently the reliability engineer for Qualitest Pharmaceuticals. He has over 30 years of experience maintaining electrical and mechanical systems as a maintenance manager, planner/scheduler, senior consultant, preventive maintenance specialist and licensed journeyman electrician. He has been involved in numerous implementations of EAM/CMMS systems while introducing best practices for reliability and transforming companies from a reactive to proactive culture. Edited by Brittany Merchut, Project Manager, CFE Media, bmerchut(at)cfemedia.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me