Whose right to know?

The attention to terrorism and possible attacks on industrial plants as well as public facilities has uncovered an interesting question: How much information about what goes on inside a plant is appropriate for public record?"Blatant examples of the problems associated with one of the nation's key right-to-know laws are everywhere," says Angela Logomasini, director of risk and environment...


The attention to terrorism and possible attacks on industrial plants as well as public facilities has uncovered an interesting question: How much information about what goes on inside a plant is appropriate for public record?

"Blatant examples of the problems associated with one of the nation's key right-to-know laws are everywhere," says Angela Logomasini, director of risk and environmental policy for the Competitive Enterprise Institute (CEI).

It should be quickly pointed out that the CEI describes itself as "dedicated to the principles of free enterprise and limited government." Even so, the concern is a valid one.

For several years, industries have reported the amounts and types of chemicals used in their plants. And amendments to the 1990 Clean Air Act now in effect require the federal government to publicly disclose sensitive information about industrial facilities around the country. According to CEI, some 15,000 facilities have provided this information to the U.S. Environmental Protection Agency, which made the information publicly available last year.

Using right-to-know provisions of the law, a newspaper was recently able to obtain a wealth of details about the types of chemicals stored in various industrial plants, the amounts stored, and the number of people that could be killed or harmed from an accidental release or terrorist attack.

The point is, we seem to be making it especially easy for any terrorist or other ne'er-do-well to pursue his harmful interests.

Of course, the argument has been convincingly made in the past that neighbors of industrial plants using dangerous chemicals should have the right to know of such dangers. But in the light of last year, one has to question whether such data should be made available to any one at any time. Some control over the dissemination of this information would seem to be in order.

CEI's suggestion is to make the data available only to local emergency planners. These local officials could then use the information for emergency planning and response and to educate the community as necessary. This proposal is reasonable and responsible.

If individual neighbors to a plant felt the need for detailed information, they could contact local officials to obtain it. Local officials might ask for proof of residence or some other qualification before releasing the data.

We would agree that certain members of the public have a right to know what's going on in their communities. But we also believe that these kinds of sensitive data should be shielded from easy access.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me