Who sets your plant’s safety standards?

The standard for safety begins at the front door of your plant. You and your employees set the standard for safety.

10/23/2015


Bob Vavra, content manager, Plant Engineering"The standard for safety begins with not OSHA nor with NFPA, but at the front door of your plant. You and your employees set the standard for safety."

Safety, as has been noted in this space many times, is not a point of negotiation in manufacturing. It is a fundamental and inviolable human right. It isn't something workers should ever have to demand. It is something management must provide at every moment of every day.

As I tour manufacturing plants, safety is the first thing I look for, and the first thing with which I'm usually confronted. From something as simple as safety glasses to as comprehensive as a 5-min safety video for visitors before they can enter the facility, safety is the benchmark for almost all great and good manufacturers.

So when encountering a situation such as chicken-processor Case Farms in Winesburg, Ohio, I have to remind myself that this really is an exception to the rules of safety. Still, the quote from OSHA Administrator Dr. David Michaels does give one pause, because government officials usually aren't this blunt.

In announcing 55 violations against Case Farms on Aug. 13, Michaels left little doubt as to his agency's disdain for Case Farms' safety practices. "Case Farms is an outrageously dangerous place to work," Michaels said in a press release announcing $861,500 in fines against the company. "In the past 25 years, Case Farms has been cited for more than 350 safety and health violations. Despite committing to OSHA that it would eliminate serious hazards, Case Farms continues to endanger the safety and health of its workers. This simply must stop."

Case was accused of violating standards on fall protection, personal protective equipment (PPE), improperly stored oxygen cylinders, amputation hazards, and what the OSHA press release called "numerous violations of electrical safety standards." The company also has been added to OSHA's Severe Violator Enforcement Program.

In deciding to contest the latest round of fines and violations, Case Farms officials said in a statement published by Farm and Dairy on Sept. 1, "We do not agree with the negative characterizations that have been made about our company and our employees ... The citations are being reviewed and we will work with OSHA, as we have in the past, to address the concerns outlined in the citations."

There's a long distance between the statement from Michaels and the one from Case Farms, except for the part that says: "We will work with OSHA, as we have in the past." Everyone agrees this is not the first time OSHA and Case Farms have discussed safety practices. It probably also is worth noting the irony of the first line on the Case Farms corporate website home page, which reads: "A core component to Case Farms' quality commitment is to ensure the welfare and health of our chickens."

In September of this year, OSHA reported that there was an increase in the number of workplace fatalities in 2014, the last year for which statistics are available. There were 4,679 workers killed on the job in 2014, compared with 4,585 in 2013. The fatality rate dropped 3.3% in 2014 because of increased hours worked, but that's probably little consolation to the 4,679 families who lost loved ones at work in 2014.

Stories such as Case Farms and numbers such as the latest workplace fatality figures are why we have safety standards. OSHA and the NFPA are just two of the groups studying the key issues around workplace safety. The standards around this issue continue to evolve. No one is satisfied with workplace safety because not everyone is safe. The efforts these agencies and others make to improve workplace safety must continue, and must be adopted and enforced.

But the standard for safety begins not with OSHA nor with NFPA, but at the front door of your plant. You and your employees set the standard for safety. No one should be able to impose upon you a safety standard greater than one that you should insist on for yourself, and no nasty words or huge fines will be able to abate the damage if you fail to meet that standard.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me