When the snow hits the fan

Plants that don't put a high priority on maintaining their assets, even when times are tough, are taking a big risk.

02/01/1999


Plants that don't put a high priority on maintaining their assets, even when times are tough, are taking a big risk. That fact was brought home to me again as the public transportation system in Chicago struggled to provide service after a January snowstorm.

Eighteen inches of snow were dumped on Chicago the first Saturday in January. And as the city began to dig out, it quickly became apparent that it would be some time before the public transportation system would recover. The reason: Inoperable equipment and an unsafe stretch of rapid transit track. Maintenance, it seems, had been neglected in an effort to keep costs under control.

The problems didn't show up while temperatures were relatively mild and snow was nonexistent. And the worst storm in 30 yr seemed an unlikely event. But when the snow hit the fan, so to speak, the system broke down.

Now some might say that management was justified in taking the risks of some deferred maintenance here or there. Those are the kinds of decisions managers are expected to make. In its more elevated forms, it has a name: risk management.

We daily see the parallels in industry -- the "what if" games and the "what are the odds" bets. Unfortunately, the scenarios played out in the board rooms are seldom connected with the realities of life on the plant floor. And overall maintenance budgets are somehow disconnected from the probability of failure under severe circumstances. The management assumption is that maintenance will somehow be adequate, even if not optimal. The bet is that the snow won't hit the fan.

But the reality is that the risk takers are making their decisions without a true assessment of the condition of the plant or even of its most critical equipment. Plant engineers, or course, are usually caught in the middle of all this. And when the snow hits the fan, they're the first to feel the blast. Given these scenarios, it behooves plant engineers to do some risk assessment of their own. And the place to start is with the identification of critical equipment.

A good maintenance organization will know exactly which equipment will cause a production shutdown if it fails. Add to that any equipment that poses a safety, health, or environmental danger in case of failure, and you have your critical list. This is the equipment that must be maintained at optimum conditions at all times. Of course, this sounds easier than it is in practice, but it is essential to real maintenance management effectiveness.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me