What’s in store for the operator terminal and IPC markets?

The sentiment among suppliers is that 2012 will be a strong year because of advance orders and strong overall sales in 2011.

11/21/2011


The world markets for industrial PCs (IPCs) and operator terminals were estimated to be worth just under $2.1 billion and $1.9 billion respectively in 2010.  Together, it is estimated that these product types accounted for just less than 8% of all automation equipment revenues in 2010. Since the highs of 2008 and the lows of 2009 the markets for both products have bounced back strongly.  However, given the current economic uncertainties, what’s in store for these markets over the next twelve months?

Currently, the general sentiment of suppliers is that 2012 will be another strong year. They continue to have full order books at least for the first 6-9 months of next year. This is somewhat surprising, when we see endless doom-and-gloom articles in the media about the increasing likelihood of a global double-dip recession. Recent data also shows that both the IPC and operator terminal markets fared well in third quarter this year. World IPC figures for the first three quarters of 2011 were up over 24% on the same period in 2010. Comparably, regional growth figures of 18%, 29% and 23% were estimated for Americas, Asia Pacific and EMEA respectively; although Asia Pacific revenues did drop slightly in the third quarter this year following a very strong result in the second quarter.
The operator-terminal quarterly market tracker of IMS Research recorded similar results. Operator terminal revenues from the Americas, Asia Pacific and EMEA all had estimated strong growth in the first three quarters of 2011. Each region was up by 32%, 19% and 12% respectively compared with the same period in 2010. 

Graph showing Combined IPC and Operator Terminal regional market revenues and growth by quarter. Courtesy: IMS Research

Within each major region, there are countries and vertical sectors driving the adoption of IPCs and operator terminals. In Asia, the market in China is projected to continue to grow very strongly to 2015. China’s IPC revenues are projected to far exceed those generated from the United States and Germany within five years. Chinese IPC revenue growth is largely being driven by the continually increasing manufacturing base, increasing automation of processes as labour costs rise, and high levels of government investment in infrastructure. 

World IPC and operator terminal revenues from machine builder and end-user sectors such as automotive and utilities are projected to grow faster than average to 2015. In the utilities sector, automation adoption is being driven by different factors in developed and developing regions. In countries like China and India, there is a need to expand water/wastewater and power generation/distribution capacity - the infrastructure to cope with ever increasing urban population. In developed countries like Germany and the US, a huge part of the infrastructure that exists is either reaching the end of its life or needs to be more intelligent. Governments will come under huge pressure to replace these facilities to maintain living standards. For IPCs in particular there also remains strong demand from areas other than the traditional industrial automation sectors. They include transportation and infrastructure, and the medical and military sectors.

Profile photo of Mark Watson, Research Manager, Control and Visualization for IMS Research. Courtesy: IMS ResearchOverall, the short- and long-term outlook for both the IPC and operator-terminal markets is very positive. The current economic situation will undoubtedly have an impact; but when this will be felt and how severe it will be is up for debate.  One thing is for sure, IPC and operator terminal suppliers should always be looking to expand their business beyond the familiar factory-automation sectors. Selling into emerging and generally quicker growing sectors should help to limit the impact of further economic downturns.   



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me