What to do with a well-meaning joker?

No one is perfect, right? Instrument Repairman Bud Fallon seemed intent on proving this premise. Bud's a nice guy, friendly, cheerful, well liked. But on the minus side he can be, to put it kindly, a pest.

07/01/1998


No one is perfect, right? Instrument Repairman Bud Fallon seemed intent on proving this premise. Bud's a nice guy, friendly, cheerful, well liked. But on the minus side he can be, to put it kindly, a pest. An incurable practical joker, addicted to clowning and horse play.

The problem with people like Bud is that not everyone appreciates their humor. Electrician Grade II, 250-lb Mike Fagan, was as serious minded as Bud was fun loving. Clearly, Bud showed poor judgment in selecting Mike as the butt of his joke. Mike was in a foul mood that day, working on a rewiring job in a hard to access location.

Bud, working nearby, had been needling Mike all morning, the other man growing increasingly irritated. When Bud rubbed sticky grease on the handle of Mike's screwdriver, it was one straw too many. The electrician pounced on his tormentor, wrestled him to the floor, and sat on his face.

Bud struggled for breath, but Mike refused to free him until two men pulled him off. By this time Bud's face was dayglow red. Swearing that he might have been suffocated, he went berserk and attacked Mike with a 4-lb hammer. That's when Maintenance Supervisor Ed Byrne appeared on the scene.

Fighting on the job was bad enough, Byrne thought. Attacking someone with a dangerous weapon, whatever the reason, was grounds for dismissal.

"That's it, Fallon, you've had it."

Stunned, Fallon started to protest.

Question : What do you think? Does Bud deserve to be terminated?

Garfield's decision: When Byrne brought the dismissal notice to his boss for approval, Plant Engineer Mel Garfield tried to reconstruct the incident. His first question was, "What provoked the attack?"

"From what I've pieced together," Byrne replied, "Bud had been needling Mike. When he greased his screwdriver, Mike blew up. He knocked Bud to the ground and, literally, sat on his head."

Garfield frowned. "That's a helluva lot of man to have on your head."

"If you ask me, Bud brought it on himself. Besides, going after a man with a hammer -- how can you condone that?"

"You can't. But we have to consider that Bud Fallon is a long-time employee with an excellent record and no previous violence. His action, while childish, was in no way malicious. I think dismissal's a bit harsh. I'd suggest a week's suspension and warning notice that further shenanigans of this kind won't be tolerated."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me