WEB EXCLUSIVE: Crown Equipment VP discusses operational success

As part of Plant Engineering's Mid-Year Report, "Bullish on Manufacturing", Dave Besser, senior vice president at Crown Equipment Corp. talks exclusively online about how the company's integrated manufacturing approach has helped streamline operations.

08/17/2012


Photo courtesy: Crown Equipment Corp.Crown Equipment Corp.’s integrated manufacturing approach has helped it streamline its operation. The company works at both lean manufacturing and sustainability. In an exclusive interview with PlantEngineering.com, Dave Besser, senior vice president at Crown Equipment, talks about executing on all of those initiatives.

PE: What are the biggest challenges right now in expanding and improving your manufacturing operations?

Besser: There are currently two big challenges we are facing in regard to expanding and improving our manufacturing operations:

1. Identifying and hiring qualified, properly trained employees

There is a real need for technical machining, welding, and assembly employees. In many cases, we are finding that the hiring pool is not quite qualified to the level we need, which is requiring us to depend more on internal training programs to qualify new hires.

One factor that is helping us meet the challenge is the close relationships Crown Equipment maintains with local schools and educational organizations. One example of this commitment is the recent virtual welding challenge we held for six area high schools. The challenge was conducted on the virtual welding training machine we use to train our employees. Teams were assessed on the accuracy and speed of their performance, as well as the angle closeness and overall quality of their welds. This sort of engagement is an important way for students to see how the skills they are learning in the classroom are applicable in manufacturing settings.

2. Lead times associated with purchasing equipment

To support rapid growth in business, major machining / robotic system capital purchases are extending to greater than 6 months in many cases. Implementation of technically complex equipment which runs a wide variety of components typically takes additional time for full ramp-up capability.

PE: What are the advantages of standardizing and integrating manufacturing processes? Where are the pressure points?

Besser: Crown Equipment designs and manufactures 85% of its lift truck components, including key parts like motors, drive units, and electronic modules. The company is integrated across 16 multi-location manufacturing facilities.

Crown’s integrated manufacturing brings together every aspect of the company’s production process toward the common goal of creating superior material handling products. Putting all aspects of production under the Crown umbrella allows us to develop and continually improve upon standardized manufacturing practices at all of our global facilities. Crown’s integration allows the company the flexibility and creative freedom to be innovative and offer customized solutions in a compressed timeframe, without any negative impact on quality.

Our integrated manufacturing philosophy is something that gives us a competitive advantage. We have an ability to manage quality that most people struggle with, having to deal with a different company, a different culture, a different quality system.

Pressure points impacting manufacturing primary focus on continuing the tradition of Crown’s integrated manufacturing model as the best manufacturing value in the industry. By continuously challenging our wide variety of manufacturing processes to compete on a global basis in terms of cost, quality and delivery, focused attention is given to process innovation, technology, lean methodologies, and employee development.

PE: Talk about your hiring and training efforts. How are you able to recruit and train the workforce you need to continue your growth?

Besser: Hiring through all Crown manufacturing operations uses a consistent process of job opening communications, interviewing, and selection. Crown is typically the employer of choice in the communities where Crown manufacturing facilities are located. Crown’s culture, competitive wages and benefits, career opportunities, and product are major reasons for potential employees to pursue employment.

Training throughout all of our manufacturing processes requires that job “competencies” are achieved in all positions. This training is provided internally and includes all aspects of the operations those employees experience to be successful. These job competencies include specific aspects of assembly, machining, welding, quality, safety, and material handling.

Additionally, Crown Equipment has an established training program for employees. The company’s Demonstrated Performance training program allows participants to develop their skills by following customized lessons and receiving personalized feedback from instructors, and each participant is able to work at his or her own pace to demonstrate ability to perform the skill.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me