We need a light bulb to go off on energy

With the continuing emphasis on energy efficiency, the move toward CFL bulbs has intensified, and the final U.S. manufacturing plant that made incandescent bulbs closed last September

03/23/2011


When Edison invented the incandescent light bulb, did a light bulb go off over his head? Or did the light bulb go off, Edison see it and say, “You know, I ought to make that…”? (This is one of those chicken-and-egg debates.)  

You have to sympathize with guys like DaVinci, Galileo and Newton. They have all of these great ideas throughout history, and not one of them benefitted from a light bulb going off over their head. Newton came closest when he got bopped by the apple.

And speaking of gravity – of the lack thereof – there is, floating around in the periphery of our lives, a debate over whether Americans will be able to choose the traditional incandescent light bulb, or whether they will be banned in 2014, as part of the Energy Independence and Security Act of 2007.

The rhetorical debate has overwhelmed perhaps a question that no one has considered yet:

What will be our new symbol for a good idea?

With the continuing emphasis on energy efficiency, the move toward CFL bulbs has intensified, and the final U.S. manufacturing plant that made incandescent bulbs closed last September. With the U.S. ban less than three years away, it must have seemed like a good time to get out of the light bulb business.

Which is a shame on several fronts, but that certainly is the evolution of manufacturing, and of consumer products. There are not a lot of Hula Hoops being made these days. The Walkman is a thing of the past. If anyone can find a 2011 version of a Pet Rock, let me know. But you just know the people who gave us the Hula Hoop, the Walkman and the Pet Rock all had that ‘AHA!” moment of discovery.

Today, if you have a good idea and that light bulb goes off, it’s a pretty good bet someone is monitoring the bulb’s energy output and calculating whether it would be better to have that good idea later in the day when there is less stress on the electric grid and the idea would be available at a lower cost.

The way we look at everything we consume has changed. We are far more thoughtful about every bit of energy these days. For those who have yet to have the energy management light bulb go off over their heads, the cost is mounting and the time to benefit from the savings is slipping away. It has become a competitive advantage to manage your energy consumption effectively. That process now encompasses everything from occupany sensors in the far reaches of the plant to whether the CEO really needs that electric pencil sharpener.

Ford took that concept to the limit. According to the Website Greener Idea, they replaced 50,000 light fixtures so that they all run on the CFLs. They also are using more natural light in the plant. Now the greener world benefits, because it is estimated the company is taking 11,000 metric tons of CO2 emissions out of the environment. But Ford also saves $1.3 million in cash, and that makes Ford’s world greener in more ways than one.

As Mark Wylie of Cisco Systems notes in this month’s cover story, that management process also now includes not just the component parts of manufacturing, but the costs at every spot of the supply chain, and at every corner of the enterprise. You may care about energy management as a way to control costs; do your suppliers share that concern? And if they don’t, is it important enough to you to chance suppliers? As we begin to build intensity on the concept of energy management as a profit driver and not just an environmental one, perhaps that is the bigger question.

Energy management is a bright idea. Examining that idea at every stage of your operation is energy well-expended.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me