Voluntary overtime: Is it compensable?

The shelving job for the lab had a high priority. At least that was Carpenter Class I Alex Marley's impression. When the end of shift buzzer sounded at 4:55 p.m., Marley figured that if he kept going another 2-3 hr, the project would be completed.

07/01/1999


The shelving job for the lab had a high priority. At least that was Carpenter Class I Alex Marley's impression. When the end of shift buzzer sounded at 4:55 p.m., Marley figured that if he kept going another 2-3 hr, the project would be completed.

Pay day was on Tuesday. Marley was at his supervisor's desk a few minutes after receiving his check.

"What's the problem?" Maintenance Foreman Luke Bailey asked.

"My paycheck's short. It doesn't include3-hr overtime I worked last Thursday."

Bailey frowned and checked his workbook. "You weren't scheduled to work overtime Thursday."

"I know, you weren't around. But you told me that lab shelving was a priority job; I figured you wanted me to finish it."

"You figured wrong. That project didn't warrant overtime pay at time-and-a-half."

Marley disagreed. "That's not the impression you gave me."

Bailey shook his head. "I'll check it out and get back to you."

Question: Is Marley entitled to the overtime pay?

Neff's decision: "Authorize the time-and-a-half pay," Plant Engineer Arnold Neff instructed Bailey. "All work over 40 hr counts as overtime even when the worker does it on his own initiative. This pay applies whether or not the work is scheduled so long as the supervisor knows about it, should know about it, or creates a situation that leads the employee to believe it is warranted."

Looking for more Human Side? Visit our archives at www.plantengineering.com.

Help us judge

Plant Engineering magazine is looking for readers to help us judge our editorial quality. For more information on our Editorial Quality Audit program and how you can become a part of it, contact Pat Mustari at 630-320-7134, e-mail: pmustari@ cahners.com.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me