Volatility factor: JP Morgan issues top nine global trade challenges for 2009

When considering the global trade environment in 2009, a number of potential issues can and will disrupt global supply chains, sourcing strategies, and the flow of working capital. Several of these issues are hangovers from 2008's economic turbulence, and some are just starting to develop.


When considering the global trade environment in 2009, a number of potential issues can and will disrupt global supply chains, sourcing strategies, and the flow of working capital.

Several of these issues are hangovers from 2008's economic turbulence, and some are just starting to develop. If not properly addressed, importers and exporters may face significant unexpected costs and increased disruptions to their supply chains.

But the news for 2009 isn't all bad; a number of promising opportunities exist as well.

1) Supply chain risk mitigation in an economic downturn
In times of economic downturn, leading companies will focus on restructuring supply chain operations to better position themselves to grab additional market share and profits as economies around the world start down the path of recovery. A large part of supply chain reengineering efforts focus on driving out inefficiencies while balancing risk. Supply chain risk mitigation will receive increased focus this coming year versus past downturns due to several factors:

Supplier financial risk. As financial weakness permeates the marketplace, we already are seeing a rise in supplier bankruptcies. Companies will need to reevaluate their supply chains to identify and support their key partners and reduce the number of potential "weak link" suppliers. At the same time, multiple suppliers for a single product or part must be secured to ensure supply chains keep running. Expect more dual or multi-source procurement of raw materials, parts, subcomponents, and assemblies to counter supplier financial risk, to develop sources closer to end markets, and to hedge currency swings and future inflationary pressures in different regions and economies.

• Volatility in energy, commodity, labor rates, and currency exchange. Companies need to factor in potential fluctuations in future energy and commodity prices, as well as labor and currency exchange rates. Some industry sectors—e.g., industrial goods and construction—are likely to see robust price increases as major economies around the world announce economic stimulus packages focusing on major infrastructure programs. Any resulting boom could produce another run of sharp increases in some commodities and energy.

• Unpredictable economic recoveries. Economic recoveries likely will be unpredictable and somewhat choppy across regions. The ability to quickly react to global shifts in demand will be critical for success. More redundant manufacturing capability should be established across multiple geographies to realize better time-to-market for end customers, and to balance and buffer demand globally. Redundant manufacturing also can serve as a hedge against currency swings and future inflationary pressures in different economies.

2) The search for working capital
As traditional sources of capital—such as bank lending—dry up or become more expensive, companies will look for alternative sourcing of working capital. Looking at internal operations is a logical direction. This trend will bring increased scrutiny to the supply chain as companies look to reduce inventory and lower operating or carrying costs. In addition, buyers will look to extend payment terms, while suppliers will drive to collect receivables more quickly, creating the need for a liquidity buffer—such as supply chain financing—to mitigate this brewing payables/receivables conflict. The current credit environment is pushing buyer/supplier partnerships to look to their trade flows to create additional liquidity.

3) A resurgence in letters of credit
The recent downturn in global markets is expected to reduce demand for commodities and associated goods and services from recent peaks, but the reduction in available credit for trade financing has been much sharper. In these uncertain times, letters of credit are a traditional, secure way of doing business, and of financing the underlying trade between buyers and suppliers. The increase in letters of credit usage became noticeable toward the end of 2007 as surpluses of working capital for open account financing began to dry up. Recently, fewer banks have been willing to extend and guarantee credit, so the supply has been declining, and in some cases, the cost has risen dramatically. For the right borrower and the right transaction there are still deals to be done, but the market will remain tight for the near future.

4) Shortening the supply chain

U.S. manufacturers continue to reconfigure their supply chains by moving plant operations and sourcing vendors closer to home and away from Asia. Limited free trade agreements, high energy costs, and rising labor and production costs in Asia all contribute to companies reevaluating extended supply chains. While opportunities still exist in Asia, Mexico is an increasingly popular source for manufactured goods as companies compete on time-to-market strategies, seek financial advantages found in Mexico's multiple free trade agreements, and capitalize on Mexico's investment incentives, streamlined customs processes, and abundant English-speaking workforce. The U.S. Department of Commerce reports a 7.2-percent increase from year-to-date imports through Mexico compared to the year before.

4) Improved speed and savings in Mexico

Mexican customs officials have been piloting a new customs regime that seeks to attract more foreign investment by improving importers' supply chain speed and mitigating the delays frequently associated with time-intensive processes and procedures at the port of entry. A customs regime is a country's specific set of trade regulations, processes, and practices that regulate the actions of importers and exporters. The government believes this new customs regime—known as Regimen de Recinto Fiscalizado Estrategico (RFE)—will decrease logistics cost in terms of dollars per container and numbers of days in transit. This in turn will attract additional production to Mexico. The program is expected to open for additional manufacturers in early 2009. Mexico Customs estimates the new clearance process will save an importer between (US) $200 and (US) $600 per shipment. Other highlights: goods can remain in a Mexican warehouse for up to two years on a tax-free and duty-free basis; the elimination of customs inspection at the port of entry, resulting in cost reductions and reduced time-to-market; no secondary customs inspections required; a simplified customs clearance process resulting in reduced Customs Brokers fees; and a three-day grace period for importers within which to correct import declarations.

6) More free trade agreements—and more scrutiny

More than 200 bilateral and multilateral Free Trade Agreements (FTA) exist around the world today. In 2009, more growth and duty savings opportunities will arise for manufacturers, but with a new administration soon in power in the U.S., will FTAs continue to prosper? The United States is expected to finalize three new FTAs in 2009 with Colombia, Panama and South Korea. Whether or not the existing FTAs on the table will be a priority for the new U.S. administration, many companies still risk leaving millions of dollars worth of duty savings unclaimed with the FTAs already in force. In addition, U.S. Customs and Border Protection is expected to increase scrutiny of FTA claims and the ability of importers to substantiate their claims. The complexity associated with understanding and leveraging FTAs is beyond the scope of many companies because they either lack the expertise, resources, or technology to do it cost-effectively. Many companies eventually come to a decision point: either invest internally or outsource to a global trade expert.

7) China clamps down on oversight
The embarrassing toy and milk product recalls that triggered unexpected supply chain costs and negative public attention for multinational manufacturers has attracted the attention of Chinese officials who fear the mass pull-out of foreign businesses. Chinese officials have vowed to clamp down on product safety failures by launching national investigations and ordering local officials to report all possible product safety issues. The regulatory environment is expected to become stricter in China with the introduction of a control list or catalogue of commercial encryption products developed and made overseas. Impacting high-tech manufacturers outside of China, this new control list calls for tighter regulatory oversight of companies that use encryption technology within their products. The Beijing-based State Encryption Management Commission intends to release the list in 2009. All foreign-based firms importing CEPs into China will need to create detailed processes and procedures for China CEP license management.

8) Imports and the Amended Lacey Act

The United States is now the first country in the world to prohibit the import, export, sale, or trade in illegally harvested wood and wood products. An amendment to the 108-year old Lacey Act will require detailed reporting (scientific name, quantity, value, and country) of any plant matter incorporated into an imported product brought into the United States. This law broadly covers plants used in processing, no matter how miniscule the amount and no matter how far removed from the harvesting of the plant. The amendment could have significant consequences for U.S. importers that will be subject to new data reporting requirements. The specific scope of what items are covered under the amendment is still being defined, with Congress acting to reduce the burden on trade. For example, plant matter used in the creation of shipping labels and manuals may not have to be reported. The first phase of enforcement is expected to begin in April 2009. Violations of the Lacey Act provisions are expected to be prosecuted through either civil or criminal enforcement actions.

9) Eyes on consumer product safety
In August, the United States signed into law the Consumer Product Safety Improvement Act (CPSIA), presenting certain manufacturers and importers with a new set of regulations to manage. Considered to be the most sweeping consumer product safety law enacted in decades, the new law is expected to usher in similar regulation around the world to addresses safety standards and requirements for children's products—such as mandatory testing, the reduction in the use of lead paint, and more visible cautionary statements related to choking hazards. In November, representatives from China, the European Union, and the United States met in Brussels for the first high-level trilateral summit on product safety to discuss key developments and further joint activities to improve cooperation and the exchange of information relating to consumer product safety. Upon import, products must be accompanied by certification that they comply with all applicable consumer product safety rules and similar rules, bans, standards, and regulations under any other laws administered by the importing nation.

About the author

As the Global Product Executive for the Logistics product suite with the Global Trade Services group at J.P. Morgan, Bernie Hart leads a business of 650+ employees that delivers end-to-end global risk management and operational solutions that provide best-in-class compliance across physical and financial supply chains.


The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Pipe fabrication and IIoT; 2017 Product of the Year finalists
The future of electrical safety; Four keys to RPM success; Picking the right weld fume option
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Power system design for high-performance buildings; mitigating arc flash hazards
VFDs improving motion control applications; Powering automation and IIoT wirelessly; Connecting the dots
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me