Virtual reality, cordless tools, and LED technology presented at the 2014 Assembly Show

Technologies designed to improve assembly line design, safety, and efficiency were presented at the 2014 Assembly Show held on October 28-30 at Rosemont, Ill. Virtual reality, cordless power tools, and LED technology are the focuses of the show.

10/30/2014


Virtual reality platform demonstrating future assembly line prototypes was displayed at the 2014 Assembly Show. Courtesy: Joy Chang, Plant EngineeringApplying concepts such as virtual reality, cordless tools, and LED technologies were among the topics discussed at the 2014 Assembly Show from Oct. 28 through Oct 30 in Rosemont, Ill.

A new virtual reality system was demonstrated for three days at the Assembly Show. The headset lets participants step inside a virtual world and experience the virtual environment with a wide 3D view. According to Mitchiyoshi Uyeda, associate research manager at Clear Seas Research, the platform is considered to be the next big thing for assembly line design and prototyping. A 3D virtual reality prototype can be tested by unlimited number of customers and get their feedback on what to improve.

"With this system, customers can experience 360 degree of the prototype at its early design stage. It saves millions of dollars on redesigning and testing the prototype. Virtual reality technology cuts the cost for assembly design, improves design quality, and reduces waste," Uyeda said. Virtual reality can also be used in different areas of manufacturing, for example, teaching welding in a safe environment.

Cordless power tools and ergonomics

Dave Garner, key customer manager for automation products at Desoutter Tools, addressed the importance of ergonomics, the freedom of assembly line workers, and how advanced cordless tools can improve plant safety and efficiency. With advanced technology, Garner envisioned that future assembly line workers can interact in a wireless workspace with cordless tools, the parts they are working on, and the assembly line.

Dave Garner from Desoutter tools talks about the cordless power tool and how it can free workers from the assembly line. Courtesy: Joy Chang, Plant EngineeringAccording to Garner, when talking about ergonomics, the assembly line workers demand freedom and comfort while the manufactures demand product quality and the volume of production. For assembly line workers, their freedom encompasses the freedom from injuries, the freedom of movement, and the freedom of working independently. "That's when tools come into the pictures. Tools are the unity of technology and human being, only with tools that provide the comfort and freedom to the operators; they can be the most productive and safe. For example, workers using one-hand tools are proved to be 30% more productive than those using two hands," Garner said.

On the manufacturers' side, the right tools can improve product quality by making sure the torque is achieved, enabling cross-threading, avoiding missing parts, and controlling the process line better. Tools that are safer can save companies from spending money on injuries. According to Garner, $20 billion is spent on workers' injuries in the US manufacturing sector every year.

Garner then talked about cordless tools, which detach workers from the assembly line physically and allow them to interact with the parts using wireless technology. "In the future, assembly line workers only need to carry a cordless, one-hand, wireless connected tool and wear Google Glass when working," Garner said.

LED technology adds visual guidance for assembly line operators

Victor Caneff talks about the LED technology's applications on enhancing visual guidance for assembly line operators. Courtesy: Joy Chang, Plant EngineeringWith the trend of flexible manufacturing and high-mix plant floor, LED technology might be the solution to avoid human operation errors and guide assembly workers to find the correct parts. "Manual and semi-automated assembly process requiring human participation can benefit from LED visual guidance to reduce human errors and improve throughput on the plant floor," said Victor Caneff, business development manager at Banner Engineering.

According to Caneff, the need for visual guidance on the plant floor is increasing with the implementation of flexible and integrated manufacturing that allows multiple product models to be produced with the same product equipment. Caneff introduced a technology called pick-to-light. The technology integrated sensors with the LED lights. Sensors will send confirmation signals to the enterprise system to indicate if an operator pick the right part or not.

The operators can see if they pick the right part seeing different colors of LED signals and hearing audio alarms when they mistakenly pick the wrong parts. LED lights can also be installed in the plant celling to project spotlights to direct operator to correct bin. "It is important to remember that there are process on the plant floor that require less automation, we need to make sure that these operators have the resource and guidance they need to operate in an increasing high mix, high volume, and sequenced plant," Caneff said.

- Joy Chang, digital project manager, Plant Engineering, jchang@cfemedia.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me