Virtual factory management: the cutting edge of Lean

A virtual factory is an integrated model that brings together cloud computing, advanced Lean data analytics, and real-time collaboration in order to solve problems quickly and make holistic improvements.


Photo by Markus Spiske on UnsplashIndustry 4.0, Industrial Internet of Things (IIoT), smart manufacturing. There is a lot of change happening in our industry right now! But what is something on the absolute “cutting edge” of lean? Answer: Virtual factory management powered by AI-based Lean analytics.

Technology and new processes are revolutionizing factories, just as lean itself did over 30 years ago. But they’re not here to replace Lean – what’s new and next will make lean even better. Continuously improve continuous improvement, you know? And virtual factory management is set to make waves.

What is virtual factory management?

A virtual factory is an integrated model that brings together cloud computing, advanced Lean data analytics, and real-time collaboration in order to solve problems quickly and make holistic improvements. Virtual factory management, then, allows for views of the whole factory at once to make informed decisions. Apply Lean best practices for a recipe for improvement!

In the past, the virtual factory was only a framework for planning and testing. But with emerging technology that lets all the components of a factory communicate with each other, the virtual factory is now a reality. When every machine, value stream, and person is connected, the power of Lean in manufacturing increases significantly.

How a lean strategy and virtual factory management work together

Virtual factory management combines real-time information, Lean best practices, and on-demand computing. It offers a better picture of what is going on at any time, with any machine or person. That’s a given. But the real cutting-edge potential is the ability to visualize, analyze, and take action on the data.

Tools and processes are emerging that automatically interpret supply chain data and transform it into best-practice dashboards that can drive improvements. The time used to spend chasing down data is now instead spent on analysis and improvement. The team gets to spend more effort on designing and executing projects.

The real game-changer, though, comes from what those data analysis tools can do with data. Artificial Intelligence (AI) and intelligent algorithms can actually learn from what’s happening on the factory floor, and bring the biggest opportunities for improvement to the forefront.

Think about a quality control initiative, for example. “When AI identifies an opportunity for improvement, the team gets an immediate alert. You know exactly where to take action, and can start solving the problem. Instead of hunting for the problem, the information is hand-delivered, so you can take action. Smart virtual factory management means you find opportunities faster, execute projects with an informed perspective, and can track and attribute results,” said Richard Lebovitz, CEO of LeanDNA, and past AME Southwest Region president, a leader in supply chain and continuous improvement tools.

Then, there’s the fact that everything lives within one platform. In an age where everything is online, this might seem unremarkable. But just a few years ago, the same data could only have existed as an email attachment. The team was connected, but the data was not.


Now, cloud-based systems exist that can manage a company’s entire lean manufacturing operation. Project management, team collaboration, status updates and tracking, measurement, and savings attribution can happen online, in a system that anyone can access anywhere, anytime. Data from multiple sources, like different ERP systems or factories across different physical locations, can be brought together. Everything really is at a Lean team’s fingertips.

The Lean best practices that so many smart people developed over the last 30 years can now be implemented and tracked more effectively. With more information about more of the processes in a factory that can all be accessed in real time, the opportunity to find areas for efficiency improvements increases. Now, there is a factory that can actually communicate and highlight priorities!

This level of data availability and factory communication sounds like it’s far off in a distant future, but these capabilities are here today! Virtual factory management takes Lean manufacturing to the next level.

Leigh Kellner is a content contributor at AME. AME is a CFE Media content partner. This article originally appeared here on AME's blog.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me