Viega, Fenwal and United Fire Protection Join Forces to Protect Lady Liberty

07/08/2005


In 2003, the Statue of Liberty-Ellis Island Foundation, Inc. was asked by the U.S. National Park Service to raise funds necessary to make a number of critical improvements to the statue. The planned improvements included

On 9/11/2001, the National Park Service closed the Statue of Liberty National Monument due to direct terrorist’s threats.ass ceiling, guided by a park ranger, an enhanced lighting and new video system. 

The foundation engaged architects and engineers to provide a variety of design solutions, andUnited Fire Protection, N.J., was chosen as the contractor to install a new high-sensitivity smoke detection system.


The high sensitivity smoke detection (HSSD) application itself is inside the stairwell area of the statue, which is largely off-limits to the public now after increased security was established post 9/11.A demonstration system was shown to be effective in this area as part of the preliminary design portion of the project, witnessed by both the engineering firm and the National Park Service.

The HSSD system utilizing air-aspirating technology. The fundamental theory is to actively bring the smoke particulate matter to the detector—rather than passively waiting for the smoke to drift to the location of the detector. The system does this by a series of tubing networks with small holes, attached to a central detector unit with a fan, drawing the air from the monitored space, back through the tubing network, to the detector.

The detector utilizes a laser-based particle discrimination technology to determine both the number of particles and the size of the particulate in order to determine and discriminate between smoke levels and other contaminants like dust or pollen. The result is a magnitude more sensitive than standard spot detectors. Additionally, because the equipment uses the particle discrimination technique, no filtering is required and thus maintenance of the unit is minimal.

The result, says the contractor, was a project that finished ahead of schedule in July 2004.“We saved between 20% and 30% in labor costs at least,” said Joe Savino, United Fire Protection. “We have been using the system since 1999 and find it extremely efficient.”

The Statue of Liberty is more than a monument. She is a beloved friend, and a living symbol of freedom to millions around the world. The exhibits are a tribute to the people who created her, to those who built and paid for her, to the ideals she represents, and to the hopes she inspires. Viega, FenWal and United Fire Protection are partners who are proud to be a part of her history.

For more about Propress from Viega, click here . For information about HSSD from Fenwal, click here .





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me