U.S. tops the world in foreign investment confidence

Kearney study: Boost in manufacturing productivity overcomes global economic uncertainty

06/26/2013


As investors prepare to slowly dip their toe into global investment, their first step increasingly is in the United States.

That is one of the results of the latest Foreign Direct Investment Confidence Index, published by global management consulting firm A.T. Kearney. The index puts the U.S. at the top of the list, and reflects the continuing trend of both American manufacturing bringing previously outsourced jobs back to the U.S. as well as greater confidence from foreign firms looking to locate in this country.

The cloud on that horizon, according to the report, is that one-third of companies still are taking it slowly about reinvesting following the recession crash five years ago. But most companies already have seem a return to their pre-recession budget levels, and growth, however slow, also seems more likely than at any point since 2008.

“While investors are still in a holding pattern as they have been since the recession, they seem more optimistic and less jittery than they have in recent years,” said Paul Laudicina, chairman emeritus of A.T. Kearney and chairman of its Global Business Policy Council. “There’s been a leveling effect this year between developed economies and developing nations in terms of foreign investment. The world seems to be slowly finding its footing.”

For the first time since 2001, the U.S. overtook China as the top country for foreign direct investment confidence. Developed countries led the resurgence, as confidence levels were higher for most developed countries across the board. Even Europe, still mired in its own debt and financial crisis, placed seven countries in the top 20 (see chart below).

For the first time since 2001, the U.S. overtook China as the top country for foreign direct investment confidence. Courtesy: A.T. Kearney

“A variety of factors—including high-impact weather events, the Eurozone crisis and stagnation in economic recovery, China’s rising labor costs, and the U.S.’s own slow recovery in the face of fiscal uncertainties in Washington—continue to make corporate investors jittery about the short-term future,” Kearney officials said in a press release. “Half of respondents said they are more optimistic about the global economy than they were a year ago. Still, just 34% of corporate investors expected the global economy to recover to pre-recession levels by 2014. “

“Rather than a temporary safe haven during economic upheaval, emerging markets are developing into a complement, instead of an alternative, to the developed world,” said Erik Peterson, managing director of A.T. Kearney’s Global Business Policy Council. “The lines are blurring. Executives are deploying strategic planning tools to understand that the risk and reward of investing in emerging markets is converging with those of developed economies.”

The United States reclaimed first place in this year’s index for the first time since 2001. Investments during 2011 were up 15% from 2010, reaching $226.9 billion. That’s below the pre-recession peak of more than $300 billion but still tops in the world for the sixth straight year.

“U.S. manufacturing productivity has been on the rise since the recession. After downturn-induced cutbacks, companies made the best of a bad situation by investing in productivity-enhancing tools and equipment. Coupled with a weaker dollar and rising wages in developing countries, these gains have the potential to bring long-term benefits to the U.S. economy,” Kearney officials said in a press release. “However, 77% report that their investments have been affected by the current uncertainty and political brinkmanship surrounding the U.S. federal budget.”

China’s situation continues to revolve around labor, quality and productivity issues, although 73% of respondents said they would continue to manufacture in China despite the wage increases.

“With many of the gains in productivity of the past few years now exhausted, companies themselves will need to generate efficiency gains by improving communication and processes, enhancing speed and flexibility, implementing new technologies, and developing talent,” Laudicina said. 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me