U.S. manufacturing rebound driving optimism for global growth

Despite challenges, economists at MFG Meeting find "a bright future"

03/09/2012


Manufacturing productivity and growth is driving the U.S. out of its recession and toward a strong growth cycle for 2012 and into 2013, two leading economists told The MFG Meeting in Orlando Friday.

The Manufacturing For Growth meeting brings leaders from the Association for Manufacturing Technology, the National Tooling and Machining Association and the Precision Metalforming Association to discuss how to keep manufacturing growing. Despite the crises in Europe and Iran, economists see tremendous growth potential, and also see manufacturing leading the way.

“There is a growing optimism that we’ve passed the worst of it, that we’re entering a stronger growth rate,” said Adrian Cooper, CEO, Oxford Economics. “One of key foundation is foundation increased optimism about prospects in the U.S.”

“If you need to spend money on people and process, this is the time to do it,” said Alan Beaulieu, president of the Institute for Trend Research. “We see two years of economic expansion and won’t see any constraints along the way. The leading indicators are pointing up. Banks are lending, employment is rising, exports are up. If we had more qualified labor, we’d hire them.”

Beaulieu said the U.S. manufacturing market is driving such productivity that even Chinese manufacturers to locate in the U.S. “U.S. labor is good labor,” he said. “We make cars people want. We have the same cost basis as China, but we have a bright future and they do not. If you want to be encouraged, there is a lot to be encouraged about.”

Cooper said that labor costs in the U.S. have stayed relatively flat in the last decade, while labor costs elsewhere have gone up – and in the case of China, gone up sharply. “When you compare unit labor costs, it’s really striking. There’s been no increase over the course of last decade. That reflects constraints on wage growth and strong productivity increases,” he said. “We’ve seen very strong increases in China, but also strong in Germany. It has been transforming the attractiveness of U.S. for manufacturing production.”

Brian Norris, vice president of marketing for Sandvik USA, started the session by noting, “There seems to be a clear and common theme – business is great. But we also have to plan for tomorrow.” To that end, both economists indicated that global pressures and domestic policies could weigh on continued economic growth.

“This slowdown in 2011 we’ve seen have had a lot to do with sovereign economies in Europe,” said Cooper. “They’ve had to implement very severe fiscal austerity. These economies are facing very severe recession, which is pulling down Euro block.”

“We’re predicting a mild recession for 2013 and into 2014,” Beaulieu said. “It will have a mildly negative impact, but it won’t be anything like 2009. That’s not for a while down the road.”

One big issue is energy, and Cooper said contrary to popular perception, U.S. dependency on foreign oil is actually on the decline, a trend he expects to continue.

“In contrast to Europe and China, dependency on imported energy is going to be declining in the U.S., while in Europe and China it’s going to continue to rise,” said Cooper.

“Prospect for long term production is high, prospects for short-term disruption is high,” added Beaulieu.

Beaulieu said the machine tool industry expects to remain high, led by auto and aerospace industries. While growth rates are not expected to be as high as in 2011 as the recession began to drift away, both economists see string machine tool growth for the sector.

“When looking at baseline forecasts, we see solid growth this year and solid again in 2013 and 2014,” Cooper said. “It provides a platform on which we can see growth in the rest of the world.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me