U.S. manufacturers can benefit from global machine tool market growth

EMO officials tout American importance at September trade event in Germany

05/09/2013


The emerging global middle class is demanding modern products, especially high-tech products, the organizers of this fall’s EMO machine tool conference in Germany said this week. That has fueled a sharp increase in demand for the machine tools to create those products in every part of the world, and a belief that the U.S. machine tool manufacturers have a crucial role to play in that growth.

“The whole world over, the industrial sector is facing major challenges," said Dr. Wilfried Schäfer, Executive Director of the EMO’s organizer VDW (German Machine Tool Builders’ Association) in Frankfurt am Main, Germany.

EMO experts note the international machine tool market has more than tripled in the past 20 years up to 2012, to around $85 billion. Since the turn of the millennium, machine tool consumption on a dollar basis has grown by an annual average of almost 7%. The principal driver here was Asia, where in 2012 two-thirds of total worldwide machine tool production output was consumed.

EMO officials said machine tool consumption will increase in 2013 by 8% to about $92 billion. “In China, the premier growth driver for the global economy, the double figure growth rates in GDP are weakening to high single figure increases,” EMO organizers said in a press release. “But there’s an ongoing shift in the weightings involved: as per capita income rises, demand for consumer goods supersedes demand for capital goods as the primary driver. Now it is the growing middle class who are demanding more and more goods and services, electronic high-tech products, more and eco-friendly vehicles, and much, much more. This applies not only to China, but to many emergent markets worldwide.”

That growth is expected to extend to the United States as well. “The significantly improved asset situation of many Americans, and the high demand for replacements, are boosting vehicle sales,” said EMO officials. “Population growth, an aging society, and Western-style diseases are also leading to annual growth rates of between 4% and 6% in the U.S. medical technology segment, the world’s biggest market in this category.”

They see growth in electrical engineering, precision mechanics, optics and mechanical engineering. “The U.S. imports around 67% of its machine tool requirements, which means it is vital for customers from the country’s industrial segment to visit EMO 2013 in Hannover to learn more about ongoing trends and innovations in the metalworking sector from all over the world,” event officials said.

The 2013 EMO event is Sept. 16-21 in Hannover, Germany, and event officials said the presence of U.S. companies is crucial for everyone involved. “As a major exporting nation, the U.S. needs its manufacturers to show the flag at the world’s premier trade fair for this sector,” show officials said. “In Hannover, they will also be meeting their customers from Europe in large numbers. With a share of 42% and over 50% growth since 2009 to most recently$ 546 million, Europe is an important growth market for U.S. manufacturers.”

“At EMO, manufacturers and visitors from the U.S. will meet the entire world of metalworking,” the VDW’s Wilfried Schäfer added. “So for anyone in the U.S. who has anything to do with machine tools, visiting and exhibiting at EMO is a definite must.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me