Underwriters Laboratory: Sustainable manufacturing will attract customers

Sara Greenstein from Underwriters Laboratory explains how the average consumer's expectations of a product correlates with manufacturing production and how that affects the industry at large.

02/13/2012


What’s the direct relationship between consumer expectation and manufacturing production? That’s the question Underwriters Laboratories set out to discover when it launched its “Navigating the Product Mindset” study in 2011. Sara A. Greenstein, senior vice president and chief marketing and strategy officer for UL discussed the study’s details with Plant Engineering.

PE: One of the more interesting parts of the study is that consumers have a different view on component parts as it relates to product safety than do manufacturers. Why is there this disconnect?

Greenstein: It’s clear from the study that consumers are becoming more interested and savvy about products, and not just about the assembly of their products, but about the components of their products. A holistic view of the data leads one to presume that consumers are becoming more aware of the global supply chain’s complexity, and with that, how component parts impact the quality and safety of a final product. Added to that is the power of social media and the Internet. Consumers have greater access to uncover the details surrounding products’ components. Manufacturers could view this as an opportunity to differentiate their products by informing consumers about component parts.

PE: Product quality – and by extension manufacturing quality – is an important issue for both manufacturers and consumers. Is there a sense that product quality has declined in recent years?

Greenstein: No, quite the opposite. The study says that more than half of all consumers perceive product quality to be better today than five years ago in all categories (with high tech having the highest response and processed food the lowest), and Chinese and Indian consumers are the most positive about product quality today versus five years ago. So, in general, confidence in product quality is quite high, among both consumers and manufacturers. It is interesting to note despite the perceived improvement in product quality, on average 76% of all consumers feel manufacturers do not use the best materials in their products, so there is still opportunity for improvement.

PE: Product reliability is viewed as having a greater impact on profitability than sustainable manufacturing. Sustainable manufacturing is viewed as potentially profitable. Are we moving toward sustainability as a profit center? And at what speed?

Greenstein: UL recognizes that the environmental space is still relatively young and evolving. At the same time, however, we also recognize that sustainable practices--from green manufacturing and commerce to green building and lifestyles--are the wave of the future. Sustainability is to the 21st century as fire safety was to the 20th century, and before we know it, it's going to be requisite.

Download Navigating the Product Mindset here.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me