Uncommon side: The hoodwinked employee -- Part I

Chief Engineer Joel Shifron was dismayed when he heard through the grapevine that Group Leader Vince Russo had all but decided to accept a job offer from a competitive firm. Russo was a guy he couldn't afford to lose.

09/01/1999


Chief Engineer Joel Shifron was dismayed when he heard through the grapevine that Group Leader Vince Russo had all but decided to accept a job offer from a competitive firm. Russo was a guy he couldn't afford to lose. Confronting the engineer with the rumor, Shifron asked if it was true.

Russo admitted it was. "You can't blame a guy for trying to better himself," he replied.

"That's true, but management has big things in store for you." The chief did his best to dissuade him, but Russo had apparently made up his mind.

"Do me a favor," Shifron asked. "Don't tell them you'll take the job until I have a chance to discuss it with Harry."

Russo reluctantly agreed to hold off for a short time. That afternoon, Shifron called him to the conference room. Jeff Balsam, his assistant, was also present.

"I have good news, Vince. The boss agreed to go along with a 15% raise, effective at once."

"I dunno," Russo said, "It's not the money. The executive who interviewed me assured me that I would make senior engineer within a year."

"I don't think that's a problem," Shifron said. "Just hold on a little longer."

Shifron huddled again with Plant Engineer Harry Boggs, and returned to give Russo the same assurance about making senior engineer within a year.

Russo seemed to be wavering. "Why shoot crap with your career?" Shifron reasoned. "What you have here is a sure thing. Your job is good for life. Management has plans for you. With a new job, you never can tell. It could blow up in your face."

Russo let out a breath. "Fifteen percent? And Harry is serious about making me senior?"

"That's what he said," Balsam chimed in. "I was there."

"Ok, then you're stuck with me."

But in weeks to come, the company's fortunes went downhill. Russo's work output fell off as well, along with performance throughout the department. He received a termination notice 6-mo later.

Russo was stunned. "You said I would make senior in a year, and that my job was good for life."

"Maybe so," Shifron countered. "But this was automatically predicated on sustaining an acceptable level of performance. Your productivity fell below standard."

"That's a crock," Russo replied. "Since the volume of work fell off, there was nothing I could do." He threatened to sue for breach of promise.

Question: How do you rate Russo's chances of winning the suit?





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me