UL launches power quality assessment program

Data, test labs can be tested through new service

06/08/2009


Underwriters Laboratories has launched its new Power Quality Study service offering. This new service, available to customers of Data Acceptance Programs (DAP) and Manufacturer Test Laboratories (MTLs), offers an assessment of the power quality of a customer's testing location.
"UL is delighted to provide this new service offering because it supports our public safety mission by helping to assure there is a suitable environment for testing products," said Gary Savin, Vice President and General Manger for Power and Controls.
The DAP and MTL programs allow manufacturers to conduct their own testing or to contract with another testing facility to complete testing. However, DAP customers and International Electrotechnical Commission for Conformity Testing and Certification of Electrical Equipment (IECEE - CB) Manufacturer Test Laboratories (MTL) are required by ISO/IEC 17025 Clause 5.3 to monitor and control their test environments including power sources. When a customer lacks the technical ability or equipment to complete a power quality study itself, UL now offers an added service to complete the power quality study for the testing area.
A power quality study assessment confirms that the source of power meets minimum voltage regulation, frequency regulation and harmonic distortion requirements. With UL's Power Quality Study service, a report is provided to the customer for their records and can be used to verify the power quality of the test environment for submitted test data.
Customers are required to conduct a power quality study if they wish to participate in UL's DAP or MTL programs. UL customers may save time and money by having UL perform this service as opposed to outsourcing the work to another service provider or conducting the tests themselves. UL utilizes calibrated equipment and knowledgeable, experienced staff in performing power quality studies.
"UL is committed to providing our customers the fastest, highest quality and most customer friendly service possible," said Savin. "Providing power quality studies further supports UL's goal of becoming a one-stop-shop for all of its customers' testing and certification needs."
Underwriters Laboratories is currently providing this service to customers across all industries within the United States. It has plans to expand internationally in the future and will notify its customers of that date in the future.
For more information on UL's DAP program, visit: www.ul.com/dap.

 





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me